Connect with us

Tools

Hitachi Vs. DEWALT Vs. Porter Cable Air Compressor

Published

on

If ever you’re looking for an air compressor, then you’ve just come to the right place because we will share you the top 3 best air compressors in the market today.

You see, picking a good air compressor actually comes down to your needs and your current projects. Meaning, it will be based on what features you’re looking for. Most of the air compressors in this review are small enough to be easily stored but take note that they’re powerful enough for various kinds of heavy projects.

The advantages and disadvantages are just too many to list, and along with that there are so many air compressors in the market today that it becomes quite difficult to pick. And that’s the reason we’re here.

We want to help you get the best air compressor for your needs, so stay tuned! 

Hitachi vs. DEWALT vs. Porter Cable Air Compressor Review

1. Hitachi EC28M Ultra Quiet (59 DB) Oil-Free Portable 1 gallon Air Compressor

What You Will Get With This Product?

This small unit is relatively cheap. It is compact and easy to carry and use, which ultimately make it great for beginner users.

Performance

Truth be told, the performance of this unit is quite low, since it only produces 0.8 CFM at 90 PSI. However, it doesn’t generate more than 59 decibels, which make it ideal for indoor use. Nonetheless, the best thing about this unit is its portability. Its components are not only easy to carry and convenient to store, but it only weighs a mere 25 lbs. This aspect makes it one of the lightest models out there.

Tank Capacity

Its tank capacity can hold 1 gallon of air, and can pressure up to 125 PSI. This is simply an ideal model if you are looking for a light-duty air compressor that is easy to transport and store.

As we mentioned above, perhaps the only gripe of this model is that it only comes with a 1 gallon air tank. But then again, that also makes the unit very portable while producing great amount of output.

Pros:

  • Incorporated with steel roll cage with rubber grip in order to protect critical parts
  • Comes with integrated control panel
  • Stainless steel braided discharge hose resists corrosion
  • Quiet industrial oil-free pump gives high durability with no maintenance
  • Factory installed industrial quick coupler for easy one handed hose connection 

Cons:

  • Probably only suitable for hobby work
  • Not that powerful

Top FAQs on This Product:

Q: Does it easily fill a car tire?

A: No problem filling up a car tire, but the process could be slower.

Q: Where is this made?

A: This particular model is made in China.

Q: Is it a steel tank?

A: Yes, this one is a steel one because magnet sticks to it firmly.

What Take on This Product:

To sum it up, this unit from Hitachi is the company’s first quiet air compressor that features an industrial oil-free pump that doesn’t only give high sturdiness, but also gives maintenance-free operation. Its motor is protected with an overload protection mechanism that cuts off supply in case of emergency.

It only weighs 25.2 pounds and designed with an ergonomically shaped rubber carrying handle. It is easy to transport and store. And lastly, it has a zero set-up time, and is ready to plug and play straight out of the box. 

2. DEWALT Pancake Air Compressor, 6 Gallon, 165 PSI (DWFP55126)

 

 

What You Will Get With This Product?

The thing about portable 6-gallon tank air compressors is that they don’t cost an arm and leg to find. And that’s where DEWALT DWFP55126 comes in. This unit has a maximum PSI of 165 with 2.6 SCFM delivered from a 90 PSI pump.

Noise Output

Its noise level is quite manageable at 75.5 decibels so it should not really hurt your ears. That particular decibel maintains itself even during high usage of the unit, so it is a nice indication of what to expect whether during general use or peak output usage.

Performance

DEWALT DWFP55126’s high performance is guaranteed as it comes with high-flow couplers and regulator, which get the most air to your tools instead of lagging their output. In addition, the unit comes with a removable console cover that protects the crucial parts of the unit and still provides you access when required.

Convenience

Its tank draining is managed by a ball drain valve that is very convenient to access. Its legs are protected with a rubber in order to make them stay still. Now, for consumers that usually visits many work sites every day, its cord-wrap feature will surely give convenience as it keeps all of your tools ready-to-go in one unit.

As for the power aspect of this unit, it comes with certain misconceptions because it supports dual users. However, even with a high-efficiency motor that starts up smoothly, the entire unit is quite weak for all the tools attached to handle. All in all, it has a good power output.

Pros:

  • Easy to carry and store
  • Low maintenance oil-free pump
  • Relatively lightweight 6-gallon tank
  • Machine turns off automatically after reaching 165 PSI
  • Comes with highly-efficient motor that functions in any weather 

Cons:

  • It’s not an ideal unit for large spraying tasks
  • Doesn’t come with air hose 

Top FAQs on This Product:

Q: Is it really portable and lightweight?

A: Yes! It is a compact designed model.

Q: What is the maximum capacity of its tank?

A: 6.0 gallon is its maximum capacity.

Q: Does it make too much noise?

A: It doesn’t. The noise is tolerable though. 

What Take on This Product:

In summary, this unit is easy to use, dependable, durable, and comes with many premium features, in fact, the manufacturer managed to nab some of the high-end features of certain top-notch premium units in the market.

Overall, the DEWALT DWFP55126 is a very good pick especially if you’re someone who’s looking for killer features in a relatively cheap price. 

3. PORTER-CABLE C2002 Oil-Free UMC Pancake Compressor

 

 

What You Will Get With This Product?

This unit is quite special that many users all over the glove use in their day-to-day lives. Even though Porter Cable Company is located in America, the company has an influence in many parts of the world.

Pump Output

Now, the unit’s pump actually works in a specific manner. It utilizes no oil and provides users a highly maintained level of gas while providing the pressure you need. It doesn’t matter how long or how much you use the unit, its pump will work very effectively.

Tank Capacity

Its tank capacity can hold 1 gallon of air, and can pressure up to 125 PSI. This is simply an ideal model if you are looking for a light-duty air compressor that is easy to transport and store.

As we mentioned above, perhaps the only gripe of this model is that it only comes with a 1 gallon air tank. But then again, that also makes the unit very portable while producing great amount of output.

Built Design

The pancake design of this unit lets you carry it and travel with ease. Some users who have used this unit also claim that this air compressor is the best they’ve ever utilized. Due to its high-quality material that was used in its production, its pump will work for you in many years. Its new features include rubber feet and water drain valve.

These have made the work easier because when you are using this pump in water tanks, there are many issues concerning the water that leaks into the pump. The valve deals with them. We have explained the other features of the Porter-Cable electric air compressor in detail below.

Durability

This unit is one of the most durable air compressors in the market today. This air compressor is ideal blend that lets you do pro work while also maintaining low key tasks that are usually overlooked. In addition, its durability will mostly depend on how well you can maintain it. Make sure to keep it clean, so that there’s no mud or dust stuck in  its bearings.

Pros:

  • Convenient and fast to start
  • 5 gallons tank capacity which is enough to power plenty of tools
  • Oil-free operation needing easy maintenance
  • Fast recovery time in just 2 minutes
  • Durable and tough casing 

Cons:

  • It’s quite heavy
  • Tend to emit low sound when in use 

Top FAQs on This Product:

Q: Do the product dimensions matter?

A: Not really, but it’s worth being aware of them for convenience for purposes like outdoor usage.

Q: What is the best feature of this unit?

A: Obviously, it’s the portability aspect of this unit.

Q: What are the main uses of this unit?

A: You can use it around work and at house. You can also use it in camping or even in your boat! 

What Take on This Product:

For the most part, acquiring the best air compressor out there is a daunting task, particularly if you don’t know what factors you need. But we’ve explained all it to you, so you’re now fully aware of this unit’s capabilities. This unit is absolutely more than what you pay for it. It will surely help you in many years. 

What is the Difference between Hitachi EC28M vs. DEWALT DWFP55126 vs. PORTER-CABLE C2002?

Performance

The performance of Hitachi EC28M is quite low compared to both DEWALT DWFP55126 and Porter-Cable C2002, since it only produces 0.8 CFM at 90 PSI. However, it doesn’t generate more than 59 decibels, which make it ideal for indoor use. Nonetheless, the best thing about this unit is its portability. Its components are not only easy to carry and convenient to store, but it only weighs a mere 25 lbs. This aspect makes it one of the lightest models out there. 

Noise Output

Obviously Hitachi EC28M is the quietest air compressor in this list. Now, compared to Porter-Cable C2002, the DEWALT DWFP55126’s noise level is quite manageable at 75.5 decibels so it should not really hurt your ears. That particular decibel maintains itself even during high usage of the unit, so it is a nice indication of what to expect whether during general use or peak output usage. 

Built Design

Compared to both Hitachi EC28M and DEWALT DWFP55126, the pancake design of Porter-Cable C2002 lets you carry it and travel with ease. Some users who have used this unit also claim that this air compressor is the best they’ve ever utilized. Due to its high-quality material that was used in its production, its pump will work for you in many years. Its new features include rubber feet and water drain valve. These have made the work easier because when you are using this pump in water tanks, there are many issues concerning the water that leaks into the pump. The valve deals with them. We have explained the other features of the Porter-Cable electric air compressor in detail below.

Convenience

DEWALT DWFP55126’s tank draining is managed by a ball drain valve that is very convenient to access which Hitachi EC28M and Porter-Cable C2002 doesn’t provide. Its legs are protected with a rubber in order to make them stay still. Now, for consumers that usually visits many work sites every day, its cord-wrap feature will surely give convenience as it keeps all of your tools ready-to-go in one unit.

Durability

Compared to Hitachi EC28M and DEWALT DWFP55126, the Porter-Cable C2002 is one of the most durable air compressors in the market today. This air compressor is ideal blend that lets you do pro work while also maintaining low key tasks that are usually overlooked. In addition, its durability will mostly depend on how well you can maintain it. Make sure to keep it clean, so that there’s no mud or dust stuck in its bearings.

Final Thoughts

So that concludes this review. With the information we shared to you, we hope that you can make a good purchase. Remember all that you must always consider your needs.

Try asking yourself if this particular unit comes with the right features you can use, otherwise move on to another product we listed above. But we doubt you’ll have a hard time acquiring one soon because all three air compressors we featured above will surely satisfy your needs.

Anyways, if you have any thoughts about this review, please comment down below and we’ll try to get back to you as soon as possible!

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

seventeen − 3 =

Tools

Benchtop Vs. Floor Drill Press

Published

on

By

Do you find it hard to choose the best tool to perform your drilling, sanding, and mortising projects? A floor drill press will do tougher jobs, but it comes at a higher cost, which may not be worth it for home-based workshops. You can buy a benchtop drill press if you concentrate on drilling standard Stock and light metal. Whichever workhorse you choose, ensure you get a solid cast iron construction and a powerful motor.

The benchtop drill press has a smaller motor usually 3-7 amps and a horsepower rating of 1/3 to 2/3, which is enough for woodwork. In this review, we chose WEN 4214, a top-rated 5-Amp drill press with a budget-friendly price that gives you value for the money. It has a 5/8-inch chuck, 3-1/8-Inch drill depth and 12-Inch swing capacity. It is suitable for both DIYers and commercial woodworkers with heavy-duty woodwork projects.

If you intend to drill large Stock, over 13-Inches, as well as heavier metallic applications, then you are better off with a great floor drill press. Shop Fox W1848 is a powerful 9-Amp drill press that you can also convert into a quick sander or a mortising tool depending on your needs. It is more expensive compared to the WEN 4214 but worth the investment considering its solid construction and broader application.

1. WEN 4214 12-Inch Variable speed drill pres

WEN bench tools are designed for professional woodwork, but they have a friendly design making them easy to operate. This drill press is specially designed to handle heavy-duty drilling, sanding, or mortising projects in a workshop. Most people go for it because of its friendly price, but we loved it for its solid cast-Iron construction and a powerful 5-Amp four-pole motor. It has five-speed modes ranging from 580RPM to 3200RPM, allowing you to customize the speed for different material densities.

It is operated using a rack and pinion system that is both durable and easy to operate. It has a 5/8-inch keyed chuck, which can be connected to a variety of bits and sanding drums up to a 1/64-inch diameter. The spindle travels 3-I/8 inches, which allows you to drill deeper than the 2.5 inches offered by most drill presses. You can also set accurate depths for each project with the depth adjustment stop for uniform depths.

It stands 37 inches top to bottom, which makes it easy to operate on a table or directly from the floor. It also weighs 85lbs, which makes it stable when running and easy to move around when necessary. This drill press is also easy to use thanks to an LED display that tells the exact speed of the motor. It also has a laser guide light, which increases accuracy. Moreover, it has a work light that brightens up your workspace.

The table is also suitable for loading large Stock measuring 9 inches on both sides, meaning it can carry a load over 20 inches wide. The table adjustable and removable for convenience. It also bevels 45 degrees to both sides, allowing you to drill curved pieces, joints, and angled holes. It also has a roller extension to carry bigger loads.

 

Key Features

  • Chuck: 5/8-Inches
  • Power: 5-Amps, 110V
  • horsepower: 2/3hp
  • Quill: 2- inches
  • Spindle: 3-1/8 inches
  • Speed: 580-3200RPM
  • Table: 9.5 inches

Pros

  • The table is large and has a roller extension
  • It has a laser guide light for accuracy
  • Five-speed modes for handling different densities
  • LED display for easy speed reading
  • A bright work light for dark spaces
  • The chuck has three jaws with a sturdy bit grip
  • Cool silent operation

Cons

  • It has many parts which make it hard to set up
  • It doesn`t have a reverse drill function

Top FAQs

Q: Can I use this to drill through 2-Inch steel?

A: Yes.

Q: Can the speed go lower than 580RPM?

A: Sure. It can go down to 500RPM.

Q: Can I sue this drill press for sanding?

A: Yes.

Q: Does it have an oscillating belt?

A: No

Q: Is this drill press suitable for drilling steel?

A: Yes and No. It can drill steel, but the finish is rather rugged due to its high speed

2. Shop Fox W1848 Oscillating Floor Drill Press 

 

 

If you need to handle many commercial projects with lots of sanding mortising and drilling both metal and wood on one tool, then you need Shop Fox W1848. It has a large swing capacity of 13-1/4 inches with a cast iron body weighing 122lbs. This drill press remains stable while running. Its most significant feature is the simple change over design that allows you to switch between drilling to sanding without tools. It also has a broad 24×15 inch base for more stability.

The motor on this floor drill is also suitable for demanding projects. It is a 9-amp induction motor with a horsepower rating of 3/4hp. It also has 12 speeds from 250RPM for steel to 3050RPM for softwood, cardboards, and plastic. It is operated by a rack and pinion system, which allows the spindle to move smoothly even at high speed. It is fitted with a durable replaceable oscillating belt for long-lasting service.

Its spindle travels 3-1/4 Inches so you can use it to drill thick material. The chuck is 5/8 inches and fitted with three jaws to clamp down on a wide range of bits and sanding drums. It also comes with three different sanding drums ranging from 2 inches to 1 inch for both small and large workpieces. The package also includes grit sanding papers for each sanding drum.

The table is 12-3/6 inches in diameter and can hold wide planks up to 24-Inches in width. It is also fitted with 2-Inch wide holes that allow the chaff to go through preventing clogging. It can also be tilted at 90 degrees on both sides, making it easy to work with joints, curved pieces, and angular drilling.

Key Features

  • Chuck: 5/8-Inches
  • Power: 9-Amps, 110V
  • horsepower: 3/4hp
  • Spindle depth: 3-1/8 inches
  • Speed: 250-3050RPM
  • Table: 13-1/4 inches

Pros

  • It is easy to switch from drilling to sanding
  • 12-speed settings allow you to adjust for different material
  • Large table (13 inches) which can tilt up to 90 degrees
  • Solid cast iron construction
  • Quick heat dispersion keeps it cool when working

Cons

  • It doesn’t have a laser pointing system
  • It is too heavy to carry around

Top FAQs

Can I remove the table?

A: Yes. The table is both adjustable and removable

Q: What is the warranty?

A: Two years

Q: Is this suitable for drilling through ceramic?

A: Yes

Q: What is the voltage?

A: 110V 

Direct Comparison

Power

The floor drill press has more power than a table drill press because it is built to work more regularly and on tougher material. Shop FoxW1848 has a 9-Amp motor with a 3/4hp, which delivers a higher torque in every stroke than WEN 4124`s 2/3HP. The floor drill press delivers the high torque needed for drilling smoothly through steel and tough fiber. The benchtop drill press motor is strained by thick steel and fiber leading to a rather rugged finish.

Speed

With drill presses, you need lower speed for higher torque, especially when dealing with metal and tough lumber. The floor drill press has a minimum speed of 250RPM, which cuts smoothly through steel better than the 580RPM of the WEN 4214 drill press. Shop Fox W1848 also has 12 distinct speed settings that make it easy to customize your drilling depending on the density of the material in question.

The floor drill press has a top speed of 3050RPM, which is suitable for woodwork and plastic, although it doesn`t cut as fast as the 3200RPM delivered by the benchtop drill. WEN 4214 has only five distinct speed settings suitable for light material, including steel less than 2-Inches thick.

Sanding

Shop Fox W1848 has an oscillating belt specifically meant to make contour sanding easy. It also includes sanding drums, which reduce the extra costs needed to convert a benchtop drill press to a sander. WEN 4214 can also be used for quick sanding thanks to its high speed, although you have to invest in sanding drums and paper. It can`t do it efficiently as you have to hold and direct the workpiece yourself.

Table

These drill presses have iron cast tables designed to last for a long time under frequent heavy-duty use. Shop Fox W1848 also comes in at the top because the table is 13-1/4-inch, which allows you to access extra-large Stock. The table also bevels at 90 degrees, which enables you to drill curved pieces and tight angles comfortably. WEN 4214 has a 9.5 Inch table and a beveling angle of 45 degrees, which limits you to smaller workpieces.

Spindle Depth 

These two have equal spindle travels of 3-1/8 inches. It allows them to handle similar thicknesses of Stock. Shop Fox, however, works better through the Stock compared to the WEN benchtop drill press.

Precision

WEN 4214 has a laser-guided X-rays that pinpoint the exact point of drilling, reducing the chances of error. Shop Fox W1848 does not have a laser guide system, which reduces its accuracy.

Final Note

Choosing between a floor drill press and a benchtop drill press is a decision that affects the type and quality of your woodwork for a long time. Tight budgets and limitations of space and experience force many people to go for low-quality benchtop drill presses. This review is a comparison of the best drill press and floor drill press you can get on a tight budget and get the value of any high-end drill press.

Continue Reading

Tools

Rotary Hammer VS Demolition Hammer

Published

on

By

Rotary hammers vs. demolition hammers debates are quite complicated. In some instances, you’ll be able to complete the same tasks with either one. However, the main takeaway here is that they do come with their respective benefits you will only find on each power tool.

You must know what those benefits are before deciding which one to purchase for your needs. Let us look at what you will get from either one before mentioning else. Stay tuned!

Rotary Hammer vs. Demolition Hammer

1. Makita HR2475 1-Inch D-Handle SDS-Plus Rotary Hammer

What You Will Get With This Product:

Makita HR2475 features a 19/16 drilling capacity with the capability to give 680 revolutions per minute. It is also very convenient since it has a lightweight feature of only 6 pounds which makes it easy to carry. In addition it accepts SDS Max bits.

Unlike any other products out there, rotary hammer can automatically disengage the gears in the second that the bit binds. With this unit, if your bit jams, the torque restricting clutch will guide your hands by taking control of the tool.

It is also designed with field core interlocking steel laminations, a dual ball bearing armature, and copper commutator bars. This function aids in improving the efficiency of the unit by enhancing the energy transfer efficiency to give extended tool life and more power.

All in all, you’ll get the Maktia motor advantage designed with field core interlocking steel laminations that makes the life of the tool longer and enhances the energy transfer efficiency of it for more power especially that the tool is integrated with dual ball bearing armature and more copper commutator bars. Additionally, its sequential impact timing that provides timed hammering while rotating minimizes overlapping bit impacts and thus resulting for up to 50% faster drilling.

To supplement all of those actions, its torque limiting clutch design prevents gear damage by automatically disengaging gears if ever the bit binds. And lastly, you’re rest assured that you’ll get the most out of this power tool as it comes with a powerful 7 amp motor that can deliver up to 0 to 1,100 RPM and 0 to 4,500 BPM for the most demanding applications out there.

Pros:

  • Incorporated with built-in torque limiter that guarantees stable torque control
  • One-touch sliding chuck lets for quick bit changes
  • Comes with ergonomic d-shaped handle with rubberized soft grip for improved control and comfort
  • Extended life brushes
  • Has 3 modes of operation for added versatility

Cons:

  • You should get bit grease for it
  • Doesn’t work on 220V 

Top FAQs on This Product:

1. Can one of the settings handle the slower revolution per minute required for larger diameter holes in heavy timber?

-Definitely! It have hammer w/ drilling, drill only, and hammer only.

2. Can I use a chisel type bit, to scrap?

-As long it is SDS plus, it should work fine.

3. Does it feature constant speed control?

-Remains constant unless you’re drilling with force, that is pushing hard on the bit.

4. Will this rotary drill met me to insert smaller than 1 inch SDS-plus drill bits into it or do they all need to be specifically 1-inch drill bits?

-The drill will accept any size bit manufactured with the SDS-plus shank.

What Take on This Product:

If you’re someone that want a power tool that is very powerful in a durable way, yet simple with its design, then this unit from Makita is not here to play because it is ergonomically designed, powerful, and sleek that offers the maximum output and comfort for everyone. It’s in fact a must-have tool for every carpenter out there.

If you’re looking for the quickest way to drill a hole, then the Makita HR2475 rotary hammer is your answer. It features a powerful 10 amp motor that aids to easily get the word done. With this power tool, you’ll get up to 50% fast drilling speed with 2,500 BPM combined with its sequential impact timing.

2. Bosch 1-1/8-Inch SDS Rotary Hammer RH328VC with Vibration Control

What You Will Get With This Product:

Similar to many other models of power tools produced by Bosch, this unit also gives optimal impact energy, drilling speed, comfort, and power to acquire the best efficiency and performance. Coupling it with the model’s vibration control feature and its high power to weight ratio, you’ll get a top-notch power tool that’s bound to become immensely prominent.

Operating in 3 integral modes namely: rotary hammer, hammer only, and rotation only, its motor can achieve the speed of 900 revolution per minute and 4,100 beat per minute. In addition, it comes with an auxiliary handle that permits a flexible and comfortable grip.

Its variable speed 3-finger trigger can offer better precise bit starting as well as better operator control. Also, its integral clutch helps minimize torque reaction while its 360-degree auxiliary handle gives the power tool better flexibility for any given task.

Now, as we’ve mentioned before, its multifunction selector offers 3 modes of operation. These modes are ideal for any tough drilling jobs out there, which is really worth the price. As for its vario-lock, this mechanism places the tool in neutral, permitting the user to select from 12 different positions.

And lastly, the Bosch 1-1/8-Inch SDS Rotary Hammer features an active vibration control in its grip area and hammer mechanism which ultimately provides maximal comfort for faster drilling during those extended time of duty. All of these features are supplemented with its unrivaled power to weight ratio of 8 amps to 2.6 feet per pounds of impact and energy, as well as 7.7 pounds of compact power.

Pros:

  • Very suitable even for the most demanding DIY projects ou there
  • Comes with a carrying case
  • Backed by an excellent warranty offer
  • Offers better operator control and precise bit starting
  • Very versatile due to its 3 mode of operations

Cons:

  • Its depth guide is sometimes inconsistent
  • Can’t work with certain large bits

Top FAQs on This Product:

1. Can you use it as a regular drill?

-Unfortunately, it’s not engineered for drilling into wood because it’s a little bit powerful. It is specifically made for stone or concrete chipping/drilling.

2. Can a spade be fitted to use on this unit?

-Yes, one can fit for this model. In addition, you can remove tile with the spade bit.

3. Is this keyless?

-Yes, it utilizes SDS bits. There may be a key chuck available so you can use standard bits.

What Take on This Product:

Just like any other power tools produced by Bosch, this unit certainly outstands in almost all fields. It is well-designed and very powerful rotary hammer. In terms of overall ease of use, it’s very good as it comes with an auxiliary handle and therefore provides one better control over the device and makes the whole process of drilling a lot easier to manage.

Its 2-step vibration control minimizes the vibrations and lets you to be much more accurate when using the device. Its three different operations modes will allow you to use it for a number of various DIY projects, making it one of the most versatile models of its class today.

3. DEWALT D25263K D-Handle SDS Rotary Hammer with Shocks, 1-1/8″

What You Will Get With This Product:

This SDS rotary hammer from DEWALT comes with a drilling capacity of 1 1/8 inches and it will also deliver 3 joules of impact energy. In addition, it utilizes SHOCKS technology for its vibration control to minimize user strain.

Most high torque reactions are minimized because of its integral clutch. One thing you must know about this model is the fact that it comes with a rotating brush ring so you’ll be able to get the optimum speed and torque in forward motions and in reverse.

Its motor operates at 8.5 amps which is significantly high for a this kind of power tool. In addition to that, it accepts SDS plus bits and it also comes with a D-handle design for an ergonomic grip.

To sum it up, upon acquiring this unit, you’ll get a kit box and a depth rod that weighs 12 pounds. Not to mention that it will surely provide an incredible power that can effortlessly go through tough concrete materials. In addition, its side handle can be adjusted for up to 360 degrees for outstanding flexibility.

But what’s really amazing about this power tool is that it will accept SDS+ bits along with a D-handle design for extra user’s comfort. To supplement these crucial features, the tool was incorporated with a rotating brush ring for achieving max speed and max torque for reverse and forward motions.

As for the user’s comfort, DEWALT D25263K utilizes shock technology of vibration control to significantly reduce the strain from using it.

Pros:

  • Rotating brush ring that can deliver max torque and speed in forward and reverse
  • Integral clutch minimizes sudden, high torque reactions
  • Incorporated with active vibration control
  • 5 amp high performance motor
  • 3 Joules of impact energy

Cons:

  • A little bit noisy
  • Tends to slip on the next mode

Top FAQs on This Product:

1. Does this unit have the option of variable positions for chisel bit?

-Yes, and it can lock in position in either vertical or horizontal positions.

2. Is grease for the bits needed?

-Yes. Elbow grease would suffice.

3. What’s the difference between the 1inch and 1 1/8 inch SDS hammer?

-It’s the size of hammer and electric motor inside the unit. 

What Take on This Product:

If you’re seeking for an efficient rotary hammer drill that can aid you drill through touch concrete and other tough materials out there, then you should definitely consider this model.

The DEWALT D25263K D-Handle SDS Rotary Hammer is highly considered by many handymen around the world, who’re saying that this model is one of the finest rotary hammer drills that your hard-earned money can purchase.

What is the Difference between Makita HR2475 vs. Bosch 1-1/8-Inch SDS Rotary Hammer RH328VC vs. DEWALT D25263K?

In terms of demolishing or drilling concrete, there seems to be a countless lineup of specialized power tools claiming to be up for the task. But the sheer number of power tools engineered to power through concrete can often feel overwhelming.

And this is the reason why we’ve presented you two kinds of power tools namely: Rotary hammers and demolition hammers. To find out why the other is better over the other, and vice versa, let’s check out their respective models:

First is the Makita HR2475 that features a 19/16 drilling capacity with the capability to deliver 680 RPM. This unit is also very convenient because it comes with a lightweight feature of only 6 lbs. that makes it quite portable. Also, it accepts SDS Max bits.

On the other hand, Bosch 1-1/8-Inch SDS Rotary Hammer RH328VC provides maximum impact energy, comfort, drilling speed, and of course power to achieve the best efficiency possible and performance as well.

And lastly, the DEWALT D25263K comes with a terrific drilling capacity of 1 1/8 inches and it can also give 3 joules of impact energy. Also, it uses shocks technology for its vibration control to significantly reduce the user’s strain.

Final Thoughts

Rotary hammers are much more suitable for professional use especially that these tools are multifunction hammer. They can adjust to the right location coupled with the right drill bit that can replace ordinary electric drill and demolition hammers.

On the other hand, demolition hammers are great impact on function objects directly impact damage like you’re using a chisel and a hammer to work. All in all, demolition hammers have much higher efficiency and power compared to rotary hammers.

How about you? Have you tried both of these awesome power tools? If so, please comment down below and we’ll get back to you a.s.a.p.!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Continue Reading

Tools

Hitachi C12fdh VS Dewalt Dw715 Miter Saw

Published

on

By

A compound miter saw is a life saver for any DIYer or finishes carpenter for quick and efficient woodwork. It is not necessarily easy to land a great saw in the market today but if you have narrowed down to Hitachi and DeWalt, you are almost there. These two are the manufacturers of the most durable and reliable 12-inch miter saws in the market. Hitachi C12FDH and DeWalt DW715 are both 15amp motor saws with a 12-inch blade designed for use by both professionals and amateurs. They both have silent operation, well-marked detents at major angles on the miter and very silent operation that allows you to set up indoors. They are seemingly similar which is why a professional opinion is the best way to match one to your needs.

Both new buyers and experienced woodworkers find it hard to choose a favorite between the two because of the matching blade speed at 4000RPM and the similar price range. There are many confusing reviews online regarding these two tools which is why we conducted our own research testing both products and asking experienced users about their experience. We have created reviews below for both tools to let you choose your favorite. You can continue reading below to see our opinion and the results of the research.

Hitachi C12fdh VS Dewalt Dw715

1. Hitachi C12FDH 12 Inch Dual Bevel Miter Saw

 

 

This is a dual bevel miter saw which allows you to perform crown molding and regular lumbar cuts on both sides of your workpiece without having to flip the piece. This makes your crown cuts accurate and quick. It also has a laser pointer that can be moved to the right or left allowing you to cut accurately on both sides of the workpiece.

Like all Hitachi tools, This Miter is designed for professional use but its simple design still makes it a great saw for general home use as well as long as you can handle the specs. It is a rapid cutter featuring a 12-inch 32 teeth carbide blade with a high speed of 4000RPM. This is fast enough to cut through hardwood quickly. Its dual bevel which slides on both sides also allows you to retain your settings by just flipping the bevel at your required angle to resume the same cuts next time.

Its high steel fence allows you to clamp 6 by 4 planks comfortably which improves the precision of your cuts. It has a 15-amp belt driven motor, the most powerful motor of any DIY miter Saw delivering 1900 watts which can do cross cuts into any dense wood without leaving chipped ends. It is also very silent with little vibration at the handle.

It comes fitted with onboard clamps that helps you hold your pieces in place on every project. Its dust bag is also able to collect more of the chaff than most models. The main concern in our reviews was the lack of a safety button on the handle and their failure to include bevel detents. You also have to reach far to the back of the saw to make laser adjustments and lock the bevel.

Pros:

  • Dual Bevel moves on either side up to 52 degrees
  • A durable heavy-duty carbide blade
  • Belt driven 15-amp motor for a silent operation
  • Laser guiding technology for high precision cutting
  • Easy access brushes

Cons:

  • It lacks bevel detents
  • The plastic miter lock gets loose with time

 

2. DeWalt DW715 12 Inch single bevel Miter Saw

 

This is DeWalt’s bestseller Miter saw famous for its premium parts and easy controls. It also has a 15-amp motor with a speed of 4000RPM like Hitachi although this is a single bevel saw which means you have to flip your workpiece for double cuts. This is also a powerful miter saw able to handle any lumber needs you may have in a workshop or at home. Its constant cutting speed means it doesn`t leave splinters on the wood or chip it which makes it a great tool for finish and joint cutting.

Unlike Hitachi, this saw has bevel dents at 0°, 33.9°, 45° and 48° which increases your precision when cutting any angle on your workpiece. Its miter also has 11 detents at all major angles and even better, a miter dent override that allows you to set your own cut angle. Its miter lock is all steel making stable stops that increase the accuracy of each cut.

Dewalt also has a greater safety degree featuring a safety button on the handle which keeps you safe if you release the blade while still running at top speed. It also features a high fence with a sliding left fence that can be fully removed for accurate bevel cuts on the workpiece. This saw is also one of the lightest in the market weighing just 42lbs which makes it easy to move from one place to another.

Pros:

  • It has a safety button
  • The miter override allows setting accurate cut angles
  • Premium parts plus durable carbide blade
  • High sliding fences allows accurate bevel cutting
  • It has bevel detents at major angles
  • It has extended handles on the sides

Cons:

  • It is a single bevel saw making double cuts a tough job
  • The dust bag doesn’t catch much of the chaff

Head to head comparison of DeWalt and Hitachi Miter Saws

Performance

This is a major subject because these two tools have matched speeds at 4000RPM speeds because of similar motors. A close view at finished cuts, however, gives Dewalt an upper hand in terms of smooth finishes on dense wood. The Dewalt Miter lock is very sturdy giving it the higher precision cut. The main Hitachi fault is the non-detented bevel with a weak miter lock that may swing slightly if you are not an experienced user. Professional users able to follow the laser marker keenly, however, have no problem with Hitachi.

Durability

Both tools are made of ABS plastic and steel, the basic standard for this class of tools. The Hitachi build, however, features many plastics at the controls and miter lock which wears quickly reducing the durable service of the saw. This gives Dewalt a slightly upper hand. Major parts, however, have a matching life potential. Hitachi has easy access brushes that allow you to replace easily whenever you need to, a slight flaw there on Dewalt.

Control

Accurate angle setting is very easy on Dewalt because of the detents on both the miter and the bevel although Hitachi overrides this through the laser guide that highly increases your precision. Both tools are generally easy to operate because of the low lift angle for comfortable lowering, forward and backward blade movement. Controls for the bevel lock setting as well as miter adjustments are easy to access.

Accuracy

The primary reason for using a miter saw instead of a table saw is accuracy and these two are both high precision cutters. The Hitachi has the greatest advantage in this regard because it is a dual bevel able to cut accurate crowns on any side without the need for flipping and resetting. If you follow the laser mark accurately, its bevel cuts will also come out accurate. It is able to make the most complicated cuts which make it a great choice for a workshop

Dewalt`s major angle detents and detent overrides allow you to set accurate cut angles as well. Having to flip your workpiece for dual cuts may need a reset although it is not a reason to give up on its high-quality parts and top-notch operation. In a DIY setting, Dewalt will come in handy for a wide range of cuts although you may encounter trouble making accurate complicated cuts, especially on commercial projects.

Safety

Both saws have a strong blade guard and clamp keeping you safe from flying wood splinters and chaff. Dewalt has a safety button on the handle that extends this advantage especially for DIYers and homeowners with little experience with the saw.

Our opinion

We followed each user complain and praise carefully testing the tools to make sure it reflected on the tool and to see if it affected performance. A good saw can only be validated by great performance and in this case, both saws have a top-notch performance which means whatever choice you make, it will not be a mistake. If you follow the guide keenly, you will realize that Hitachi`s high specs need a keen eye to achieve its full advantage because Hitachi manufactures with a professional in focus. This makes it a great tool for a workshop because it can make high precision cutting even for complicated woodwork. It is still easy to use which is why even a homeowner can use it if you want to exploit the great benefits of a dual bevel miter saw worth the money.

Dewalt is a great recommendation for any setting that requires a miter saw. It is very durable and easy to operate which is why many people praise it over other tools. It is true it has premium features, reliable and durable but not without the limits of a single bevel miter saw. It is a great tool for both professionals and amateurs because of the friendly design and sturdy detents on the miter and bevel.

Conclusion

A Miter saw worth the money has to offer reliable long-term service which is why you need to choose the one saw that will prove to be a one-time purchase. This Hitachi C12FDH and Dewalt DW715 comparison has clear details of what the market has to say regarding these two tools. We have no favorite between the two but we have gone through how they both perform on site allowing you to match the right saw to your project whether you need a saw for your projects at home or for commercial grade projects.

Continue Reading

Trending