Connect with us

Tools

Porter Cable Vs. Ridgid Vs. Senco Air Compressor

Published

on

Do you happen to be in this article because you want to acquire the best air compressor for your household, furniture, and painting needs? Good thing, because we’ve got your back!

You see, most air compressors out there in the market can practically help you with the stuff we mentioned above. However, do you know which one to choose? Do you know if it will meet your needs? Or can you even afford it? There are just a number of questions you must answer so you don’t just waste your hard-earned money and regret later on.

That’s why, in order to help you choose the right air compressor, we’ve carefully researched and tested 3 air compressors which we believe that are the best among the best.

Well, enough with the chitchat. Stay tuned, and we’ll help you get the right unit for your needs.

Porter-Cable vs. RIDGID vs. SENCO Air Compressor Review

1. PORTER-CABLE C2002 Oil-Free UMC Pancake CompressorWhat You Will Get With This Product?

You can say that PORTER-CABLE C2002 is one of a kind that many users all over the glove use in their day-to-day lives. Even though Porter Cable Company is located in America, the company has an influence in many parts of the world.

Pancake Design

PORTER-CABLE C2002’s pancake design of this unit lets you carry it and travel with ease. Some users who have used this unit also claim that this air compressor is the best they’ve ever utilized. Due to its high-quality material that was used in its production, its pump will work for you in many years. Its new features include rubber feet and water drain valve. Because of these particular features, the unit will make the work easier especially when you are using this pump in water tanks, there are many issues concerning the water that leaks into the pump. The valve deals with them. We have explained the other features of the Porter-Cable electric air compressor in detail below. 

Tank Capacity

PORTER-CABLE C2002’s tank capacity can easily hold 1 gallon of air, and can pressure up to 125 PSI. This is simply an ideal model if you are looking for a light-duty air compressor that is easy to transport and store. As we mentioned above, perhaps the only gripe of this model is that it only comes with a 1 gallon air tank. But then again, that also makes the unit very portable while producing great amount of output. 

Pump Output

If you want to choose this unit, then you should know that PORTER-CABLE C2002’s pump actually works in a specific manner. It utilizes no oil and provides users a highly maintained level of gas while providing the pressure you need. It doesn’t matter how long or how much you use the unit, its pump will work very effectively.

Rugged Construction

In terms of construction, the PORTER-CABLE C2002 is one of the most durable air compressors in the market today. This air compressor is ideal blend that lets you do pro work while also maintaining low key tasks that are usually overlooked. In addition, its durability will mostly depend on how well you can maintain it. Make sure to keep it clean, so that there’s no mud or dust stuck in its bearings.

Pros:

  • 5 gallons tank capacity which is enough to power plenty of tools
  • Convenient and fast to start
  • Fast recovery time in just 2 minutes
  • Durable and tough casing
  • Oil-free operation needing easy maintenance 

Cons:

  • It’s quite heavy
  • Tend to emit low sound when in use 

Top FAQs on This Product:

Q: Do the product dimensions matter?

A: Not really, but it’s worth being aware of them for convenience for purposes like outdoor usage.

Q: What is the best feature of this unit?

A: Obviously, it’s the portability aspect of this unit.

Q: What are the main usesof this unit?

A: You can use it around work and at house. You can also use it in camping or even in your boat! 

What Take on This Product:

Getting the best air compressor for your needs can sometimes be a hard task. There are just a lot to consider. Price, brand, features are some of the considerations you should always keep in mind. That said, PORTER-CABLE C2002 is pretty much loaded with the factors we just mentioned. This only means that this unit is worth of your hard-earned money.

2. RIDGID ZROF60150HA 6 Gal. Portable Electric Pancake Compressor (Renewed)

What You Will Get With This Product?

RIDGID ZROF60150HA 6 Gal. Portable Electric Pancake Compressor (Renewed) is a solid product that gives many air compressors a tough competition. RIDGID ZROF60150HA comes with a smaller handle than most of the air compressors out there. But even with that, this unit is still easy and comfortable to carry.

Unique Design

This unit from RIDGID comes with a unique design for its regulator knob that permits any user to lock the regulator at a particular PSI by just pushing the knob in to lock and needs an easy pull in order to unlock and allow the knob to turn.

Motor Housing

RIDGID ZROF60150HA motor housing’s thick molded plastic is durable and has a fine finishing. It comes with a pair of one-handed connections so you can conveniently utilize your air hoses. In fact, this feature is probably one of its advantages over the two brands listed in this review.

Drain Valve

Now, RIDGID ZROF60150HA’s drain valve is easily located just under the rim of its tank in order to prevent catching anything. Still, remember that it is readily accessible when the consumer needs to use it.

Is It Worth the Price?

To sum it up, RIDGID ZROF60150HA is a solidly built piece of equipment; it is reliable, portable, and lightweight. See, RIDGID simply deliver their products in an excellent way, which make this product worth a try.

Pros:

  • This certified refurbished unit is tested and certified by Ryobi
  • Comes with 2 universal push-to-connect quick couplers
  • ¼ turn ball valve tank drain that allows you to drain the tank fast
  • Locking regulator holds the knob in place
  • Large 6 gallon capacity tank that minimizes cycle frequency 

Cons:

  • A little bit noisy
  • It is much better to use it in indoors most of the time 

Top FAQs on This Product:

Q: Where is the drainlocated?

A: The drain is placed below the power card right when it comes out of the air compressor just below its warning label.

Q: What is the minimum generator it will work with?

A: For the most part, you will need at least 1500 Watts.

Q: Is this unit strong enough to blow out outdoor garden hose faucets?

A: Yes it is. 

What Take on This Product:

To sum it up, this renewed air compressor from RIDGID is packed with many features. RIDGID ZROF60150HA is ideal for finish and trim work because it offers 150 PSI of output. It will also work with multiple individual on the job site because of its dual universal quick connectors and 2 nailers at once.  And lastly, it is incorporated with a high-quality oil-free pump for a reliable and maintenance-free performance. Put simply, this unit has everything you’re looking for to get your tasks done.

3. SENCO PC1131 Compressor, 2.5-Horsepower (Peak) 4.3 gallon

 

What You Will Get With This Product?

This particular unit from SENCO is a portable and compact machine that features 4.3 gallon tank. In spite of its tank size, the SENCO PC1131 can deliver more flow than your average portable compressor. In fact, it can deliver a 2.5 horsepower and can produce 4.4 CFM at 90 PSI which make this unit ideal for a wide range of uses such as finish and framing.

Motor and Pump

With this unit, you can achieve more flow compared to similarly-priced portable air compressors. Why? It’s because this unit features an oil-lubricated pump system, direct driver motor with a cast iron, and a 2.5 horsepower, that’s why it is able to deliver 4.4 CFM at 90 PSI and sometimes 4.3 CFM at 100 PSI.

Its pump is a single-stage cylinder with splash lubrication. Its oil capacity is listed at 12 oz. and must only perform change oil every three months only. While its cylinder is cast iron, its crankcase and head are made of aluminum. This metal can help with heat disspation.

Now, its compact 4.3 gallon tank can preclude users from having a disrupted flow. Fortunately, its recovery time is pretty fast, which is part of the reason why this unit is so ideal for contractors out there. Speaking of recovery time, it can go from 90 to 125 PSI in just 16 seconds, while its pump-up time is around 1 minute. Because of this, the unit is useful for air tools that need intermittent use.

Design and Build

This unit comes with a twin tank configuration which restricts the footprint particularly when compared to air compressors that have pancake design. It is electric-powered and only draws 14 Amps which only implies that you can utilize it from a standard outlet without tripping its circuit. In addition, it comes with an overload protection switch to prevent overheating.

Noise Level

Most consumers are aware that noise tends to be an issue when looking for a portable air compressor. But since SENCO PC1131 is oil-lubricated, it only comes with a decibel noise level of 77 which is pretty much quieter than your average oil-free compressor.

Maintenance and Upkeep

This unit is quite rugged. With right use, you can keep this unit around for the incoming years. In fact, the manufacturer has provided a basic maintenance chart to help you with the unit’s upkeep. The chart will let you know when to check the parts and how to maintain the pump lubricated with oil. Usually, the advice is to oil the pump after the first fifty hours of use and then every three months.

Pros:

  • Intended for contractors and ideal for home use
  • Durable with cast iron cylinder
  • Incorporated with oil lubricated pump
  • Powerful compressor for its size
  • Easy to maintain 

Cons:

  • Quite heavy
  • Not enough room between the air tank and motor to install the air filter housing without disassembling it 

Top FAQs on This Product:

Q: Would this be efficient enough to operate the Tornado detailing air gun?

A: Most likely yes because this unit is a very strong air compressor.

Q: Is it oil-less or oil-filled?

A: This unit is oil-filled.

Q: Can this compressor be utilized for home auto mechanic applications?

A: This one is more ideal for light applications, so no. 

What Take on This Product:

In conclusion, this unit from SENCO is a well-built air compressor. It boasts great amount of pressure which is sufficient enough to power a wide range of air tools. However, it might not be able to power large pneumatic tools such as grinder, sander, or saw. Overall, the SENCO PC1131 is a great unit to acquire for contractors and DIY hobbyists. 

What is the Difference between PORTER-CABLE C2002 vs. RIDGID ZROF60150HA vs. SENCO PC1131?

Durability

Compared to RIDGID ZROF60150HA and SENCO PC1131, the PORTER-CABLE C2002 is one of the most durable air compressors in the market today. This air compressor is ideal blend that lets you do pro work while also maintaining low key tasks that are usually overlooked. In addition, its durability will mostly depend on how well you can maintain it. Make sure to keep it clean, so that there’s no mud or dust stuck in its bearings. 

Unique Design

Unlike Porter-Cable C2002 and SENCO PC1131, the RIDGID ZROF60150HA comes with a unique design for its regulator knob that permits any user to lock the regulator at a particular PSI by just pushing the knob in to lock and needs an easy pull in order to unlock and allow the knob to turn.

Noise Level

Most consumers are aware that noise tends to be an issue when looking for a portable air compressor. But since SENCO PC1131 is oil-lubricated, it only comes with a decibel noise level of 77 which is pretty much quieter than Porter-Cable C2002 and RIDGID ZROF60150HA. 

Final Thoughts

The top 3 air compressors we mentioned above are perfect for many DIY projects, home tasks, and even contractors’ jobs. Each one of them has their own respective advantages and of course disadvantages.

Now what you want to do is look at your needs and your budget so you can make a good buy. Wasting your hard-earned money and regretting later is not a choice because again we already shared to you our top 3 picks that we carefully researched. Don’t go anywhere else, because the 3 air compressors above will suffice your needs.

That said; please comment down below if you found this review helpful. Thank you!

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tools

What is the Best Cordless Drill for the Money

Published

on

By

The best drill for anyone is simply one that will help you work smart and not harder but budget considerations mean you also have to invest smart. Buying a great cordless drill for your job highly depends on the type of project you intend to accomplish which is why you always have to narrow down to the battery, torque, and speed because they do the drilling. This task can still be hard because you have to isolate many brands and many products from the same brand to choose your best.

Whether you need a DIY drill or a powerful drill for commercial projects, you still have to focus on getting the maximum power possible at your desired budget. This narrows down your search to the basic features of the drill which is why we analyzed the top brands in the market and narrowed down to the few drills that can deliver on your toughest projects at the friendliest price.

This is a guide with everything you need to know about a drill and the tips you need to get the best service. We settled on our recommendations after a thorough examination accompanied by professional reviews and an analysis of customer opinions. You can look at all the details below our top picks to know what to look for in a drill and how your choice can serve you best.

Top 5 Best Cordless Drills Reviews

1. DEWALT DCD791D2 20V DRILL/DRIVER KIT

 

This is one of the most famous 20 volters in the market with an excellent performance in both high speed and high torque modes. This DeWalt Model has a light compact design for ease of control and handling even when working overhead because it weighs just 3.4lbs when the batteries are inserted. The head also measures 7 inches to allow you to fit it in narrow places when working and operate it comfortably with one arm.

The key deal breaker on this drill is the dual speed trigger with 0-500 RPM in high torque mode and 0-2000RPM in high-speed mode. These speeds are among the highest for any 20 volter in the market suitable for quick drilling, inserting and removing screws. Furthermore, it has a 15-point chuck adjustment that allows you to set an accurate torque for both modes delivering up to 500lbs for high power projects. These features enable this drill to work effectively on standard steel as well as concrete surfaces.

This drill is also well suited for harsh working conditions with metallic protection for the motor and all internal moving parts. The work light is also designed with three modes to adjust for any level of lighting including a full flashlight mode for working in the dark. It comes with two Li-On batteries offering enough runtime for all projects including a backup.

Video Source: https://www.youtube.com/watch?v=8LREUoErNE8

Pros

  • Quick recharge batteries with more life
  • A powerful metallic ratcheting chuck for a strong grip on bits
  • It comes with a backup battery
  • It has an inbuilt fuel gauge

Cons

  • The lowest Chuck setting is still too powerful

 

2. BOSH PS32-02 12V 3/8INCH MAX BRUSHLESS

 

 

Bosch is famous for tough drills and this 12 volter has some of the strongest features in the category. It is very compact and light weighing 2lbs when the battery is inserted allowing you to handle multiple tasks, especially in overhead drilling with no fatigue. Its slim 6.5-inch head is also suitable for drilling in corners or even closed spaces making this a suitable drill choice for any DIY project.

It also delivers the highest power of any 12 volter with a stable 265lb torque which allows you to drill into dry walls and wood. Its multiple speed trigger allows you to set up to 1300RPM for drilling and 400RPM for driving tasks. You can still set your accurate torque with the 21-point chuck for any drilling or driving tasks. Bosch delivers a complete kit with two lithium batteries, a charger, and a carrying case to make transportation easier.

This drill is also very user-friendly featuring a bright LED light for dark spaces and an inbuilt fuel gauge located conveniently on the side to track your available runtime. It balances perfectly in the arm with its ergonomic handle that enables you to maintain a strong grip even in wet conditions.

Video Source: https://www.youtube.com/watch?v=Rf9nbHKtEF0

Pros

  • It is very light and compact
  • It has an ergonomic grip with a convenient balance
  • Premium materials with strong external protection
  • It uses light quick charge batteries
  • It has a 21 point chuck for accurate torques

Cons

  • It has a thick handle unsuitable for people with small hands

3. Hitachi DS18DGL 18 VOLT CORDLESS DRILL/DRIVER

 

Hitachi gives a great deal on all its products with a lifetime warranty but this drill is a specifically special 18 volter. It weighs 3.7lbs with the battery but it has a convenient balance with a slim handle that makes it very easy to handle with one arm. It also comes in the classy Hitachi waterproof case to keep all your tools safe from the elements.

It is a great tool for drilling into any surface in your DIY or commercial project including concrete and metallic surfaces. Its motor delivers up to 400lbs in torque with a variable speed trigger for setting the right torque for your task. It has 22 settings on the chuck with an extra Drill/Drive mode for the most accurate power for each drilling or screw. It still completes all tasks quickly with speeds of 0-450RPM in your high torque mode and 0-1500RPM In the drill mode.

Moreover, the single sleeve chuck is all metallic with a strong grip on your bits which comes in extra handy especially in screwdriving. This Hitachi Drill is also user-friendly featuring a strategic LED light located at the base and pointing upwards to brighten up every inch of the working space. Its batteries are also very slim and powerful giving you up to 2 hours runtime.

Video Source: https://www.youtube.com/watch?v=TCDzMUU8v-o

  • It has a slim ergonomic handle easy to control in one arm
  • It has a bright strategic LED light for a brighter workspace
  • 23 Points of chuck settings for perfect torque settings
  • It is covered by a lifetime tool warranty
  • It comes with a waterproof carrying case

Cons

  • It is heavy, likely to cause fatigue when you drill overhead for long

4. Black+Decker 20V LDX120C MAX DRILL/DRIVER

 

 

This is probably the most famous 20 volter in the market famed for its classy compact design with an ergonomic handle. It features a very slim 7-inch head suitable for drilling into the narrowest of spaces. This drill has a 3/8-inch chuck, unlike most 20 volters which have ½ inch which makes it the most powerful drill for handling standard and light tasks compared to other Black+Decker products.

It delivers a powerful torque at a stable 650RPM in heavy duty tasks allowing you to drive screws into both wood and concrete. It is also suitable for drilling into light steel surfaces, concrete as well as wooden surfaces which makes it a great tool for both home and commercial projects. Its 4 pole motor with a strong metallic ratcheting chuck also makes it a durable one-time purchase.

This drill`s greatest deal breaker is the long battery life with up to 4hrs runtime that allows you to complete most projects on one charge. It still comes as a complete package with a charger and two Lithium batteries at one of the friendliest prices of any 20V drill.

Video: https://www.youtube.com/watch?v=U1O0MeG7HiM

Pros

  • It has a very slim head for drilling narrow spaces
  • Long battery life
  • It is light and compact with the torque of any large drill
  • It has a user-friendly design with an ergonomic handle

Cons

  • It haPoor grip on round bits

5. Makita XFD10R Compact Cordless Drill/Driver

 

The Makita 18 volt range of drills is also very famous for their powerful torque up to 480lbs which is one of the highest in the 18-20v range in the market. This drill is particularly designed for durability and heavy-duty functions. It features an all-metal housing to protect the parts from the elements. It is still easy to handle and operate because of the narrow ergonomic handle with a 7-inch head and an excellent balance.

Makita uses powerful 4 pole mortars designed to drill into concrete, metal, and wood. This drill has a double speed trigger with a high torque speed of 0-600RPM and a drill mode of 0-1900RPM which allows you to handle both drilling and driving tasks faster than any other drill. It comes with 18V Makita batteries but it is compatible with other Makita batteries which makes it cheaper if you have other Makita power tools.

Its Ergonomic handle is softened by rubber padding that maintains a strong grip whenever you work. Moreover, this drill has a dual LED light that brightens up your whole working space for accurate drilling. It weighs just 3.3lbs which reduces fatigue.

Video Source: https://www.youtube.com/watch?v=i5DMns3_LOI

Pros

  • It comes with powerful 2AH batteries.
  • it has a premium casing for mortar durability
  • It has a dual speed trigger with a powerful 480lb torque
  • It is light with an easy to grip ergonomic handle
  • It is suitable for heavy-duty drilling

Cons

  • The thick body limits access to very narrow places
  • Makita Bit Sets are expensive

Factors to consider when choosing the best cordless drill for the money

Like all power tools, Cordless drills are made of parts and the stronger your parts, the better and longer the drill will work for you. In this guide, we focused on the best drills at home or around commercial projects for the money after analyzing these important features.

Torque

The Torque is basically the total power or force the drill can pot behind the bit when drilling or when driving screws. Higher torque is always better but every extra pound in the torque reading attracts a higher price which is why smart buyers would just go for enough torque to handle the task at hand. Our 12 volter picks have at least 270lbs in torque which is the highest in the market for the range. They are great for any standard or light tasks at home.  However, all the 18-20V are suitable for any heavy duty drilling or driving tasks because of their 400lb and above Torque. The higher voltage drills are the best choice for drilling into concrete and steel.

Batteries

Batteries determine the amount of runtime your drill can deliver. Lithium batteries are the current basic standard in the market because they can store more power but this does not apply to all batteries. The life of your battery is depicted as AH (Ampere Hours) Powerful batteries also tend to withstand more recharge cycles compared to its counterparts. Our top picks are all rated 1.5AH and above which means they will give you at least 1 hour of runtime allowing you to finish each project before recharging. Lithium batteries also recharge within 30 minutes allowing you to resume work as soon as possible.

The Chuck

This is the front part of the drill head that holds your bits in place and they determine the bit size and most importantly, its stability. Single sleeve ratcheting sleeves are the best in the market because they have a strong grip which is why our top pick has the best-rated chuck in the market. More chuck points are also important in setting the best torque for your task to avoid snapped screws. Some chucks have 11 points which are the lowest and, in most cases, your lowest torque settings may still be too powerful which is why you have to be more careful. 18 to 22 torque points are more accurate allowing you to set the right torque each time which saves both the chuck teeth and your screws.

Weight and ease of use

When drilling overhead or in narrow spaces where you have to bear the weight of the drill, you need the lightest drill you can get. Most light drills, however, have a smaller motor which is why you have to make a slight compromise. We focused on an average weight of 3.5lbs which most customers can bear comfortably in overhead drilling. Other features such as a fuel gauge, bright work light, and ergonomic handle are also very important but not a major concern if the basic features can meet your task requirements.

Variable Speeds

Most cordless drills in the market now have variable speed triggers that allow you to choose between high-speed modes for drilling and high torque modes for driving. This is a very important consideration in the choice of your drill especially the maximum high torque speed depicted as RPMS (rotations per minute). We primarily focused on a minimum of 400RPMS in all our recommendations which allow you to drive and recover screws faster. Higher speeds are always the best as long as you can adjust and prevent snapped screws.

FAQS

What is the difference between a drill and a hammer drill?

Many people confuse the two but many traditional cordless drills can also serve as hammer drills. The hammer function works like a regular hammer where the bit hits against the bit to drive it deeper into the surface mostly in masonry. The hammer function is also important if you need to widen your hole in woodwork. Unlike regular drills which use rotations to drive the bit into the surface, hammer drills use beats against the bit which is why they are noisier and use more energy. It is always more economical to choose a cordless drill that offers this function.

Do all cordless drills accept any bit size?

Absolutely! Cordless drills hold the bits using the three jaws of the chuck which open wide when the chuck is retracted to accept any bit. However, the bit size that comes with the drill is the most recommended. If you use a large bit on a small drill, it puts more weight on the motor and they are also likely to chip the jaws. ½ inch chuck drills are the best because they can accommodate all other smaller bits. Unlike hammer drills and cordless screwdrivers which limit your choice to Hex bits only, cordless drills can take in round bits as well.

Are cordless drills as powerful as corded drills?

The main advantage of using a corded drill is the stable power supply that delivers a stable torque throughout the task. Traditional cordless bits using NiCd batteries were generally heavier and weaker but adoption of Lithium batteries has made cordless drills as powerful as any corded one. They can deliver up to 1000lbs in torque as you go up the ladder. Cordless drills also have no limit of distance from the power source.

Cleaning Tips for a cordless drill

It is important to keep your cordless drill clean to keep it in shape for both durability and excellent performance.

Conclusion

Getting the best cordless drill on the internet has become a daunting task Considering the thousands of products and misleading reviews online. We decided to go simple skipping lots of confusing technical details to the very basic features that make a good cordless drill. By matching all the great features in each category for the money, we recommended the best ½ inch and 3/8-inch cordless drills in the market for the money. Our guide is a bridge to the best sellers in the market loved by both professionals and ardent DIY handymen.

Continue Reading

Tools

Milwaukee VS. DeWalt Impact Wrench

Published

on

By

Impact wrench has a lot of names, but all of them are powerful tools that will provide high output with little exertion from you. Some people think that professionals can only use this kind of power tool, but the truth is, everyone can actually use it.

Purchasing an impact wrench and knowing how you can use it will save you on professional fees. But with the brands on the market today, it can be daunting to choose whether to purchase a Milwaukee or a DeWalt impact wrench. So I’ve rounded up two of the best on the market today and created a review for you.

Milwaukee VS. DeWalt Impact Wrench

1. Milwaukee 2763-20 M18 Fuel 1/2 Inch High Torque Impact Wrench With Friction Ring

The Milwaukee 2763-20 M18 impact wrench with friction ring has a superior performance, which delivers 700 feet of fastening torque and a 1,000 feet lbs. nut busting torque with over twice more of runtime. One of the best things about the Milwaukee 2763-20 M18 impact wrench with friction ring is that you will have two fastening modes to choose from, wherein the proprietary is the drive control feature. The mode one will deliver a total of 100ft lbs. of fastening torque, while the mode two will provide 700 feet lbs. and up.

You can use the RedLithium battery pack for your Milwaukee 2763-20 M18 impact wrench with friction ring as it has the power to provide twice the performance and runtime. The battery has a superior construction, but unfortunately, you need to purchase this separately. Milwaukee offers a five year warranty, which means that you don’t have to worry about services and maintenance.

Pros:

  • Provides a lot of power
  • Has the power to break bolts and install things back
  • Better than any other impact wrench
  • Powerful even in its lowest setting

Cons:

  • Quite heavy

 

2. DeWalt DWMT70773L 1/2 Inch Square Drive Impact Wrench – Heavy Duty

DeWalt DWMT70773L square drive impact wrench has a maximum torque of 650 ft-lb. which helps to break free a fastener easily. The total RPM of this impact wrench is 7500 with a free speed at 90 PSI, which is ideal for high powered fastening. One of the best things about DeWalt DWMT70773L square drive impact wrench is that it has a twin hammer mechanism and as well as an adjustable power regulator.

The DeWalt DWMT70773L square drive impact wrench is a one hand operation tool, which has a reverse and forward switch. The entire wrench is housed in a shock-resistant case with bumpers all around. This means that the impact wrench is durable and will last for a long period of time. Lastly, with its ergonomic handle, you will be able to grip the handle softly, and you will be able to hold it firmly.

Pros:

  • High setting provides a lot of power
  • Lightweight
  • Durable
  • Has an exhaust at the bottom handle

Cons:

  • Big in size

 

What Is An Impact Wrench

An impact wrench is also known as a torque gun, impact gun, impactor, and such. The impact wrench is used to provide high torque output without putting too much effort on the user. It gets its power from the compressed air, though there is some impact wrench that uses hydraulic and electric power.

Nowadays, cordless impact wrench is becoming popular because of the convenience that it has. The user doesn’t need to worry about any power outlet or tangled cords or cables anymore. The cordless impact wrench cord can work on home maintenance, automotive repair, product assembly, heavy equipment maintenance, and as well as major construction.

Why Should You Use A Cordless Impact Wrench

Using a traditional impact wrench can be tiring since you need to put in a lot of effort for you to remove the bolt or the screws. But with a cordless impact wrench, it will actually do all the work for you. It will only take a little effort from you, thus preventing strains and fatigue on your wrist and shoulder.

Another reason why you should use a cordless impact wrench is that it offers versatility. In fact, a cordless impact wrench is capable in tightening and loosening bolts and screws in just a few seconds. The reason behind this is because an impact wrench is known as a power tool that can do almost everything.

Also, if you are doing home maintenance or improvement, then a cordless impact wrench will surely help. The reason behind this is because you can properly thread the bolts and nuts before applying a machine to those to avoid damaging the threads. So whether you want to build a pergola or a porch, the cordless impact wrench will surely help.

What Impact Wrench Do I Need

There are different types of impact wrenches, and the kind that you need will depend on the power source that you prefer. Here are the types of impact wrenches to choose from:

Hydraulic Impact Wrenches

This type of wrench is using water under pressure so it can deliver torque to the machine to loosen and tighten the nuts and screws.

Cordless Electric Impact Wrench

A cordless electric impact wrench is gaining more and more popular because it is the most convenient impact wrench today. This kind of impact wrench is that it is powerful, lightweight, and very compact.

Corded Impact Wrench

This is the traditional impact wrench, where you need a power outlet so you can power it up. Using this impact, the wrench may limit your movement, which is why people are now switching to the cordless impact wrench.

Air Impact Wrench

As the name says, this kind of impact wrench uses compressed air, and its design provides a low cost. Air impact wrenches that are high quality have regulators to limit the direction of the torque.

Can An Impact Wrench Be Used As A Hammer Drill

An impact wrench and a hammer drill are two different power tools. The impact wrench is used to attach screwdrivers on surfaces and materials. It acts like a screwdriver, which is used for bolts and screw. The hammer drill is used to drill holes on cement, brick, and other similar materials. So the short answer to this question is no because they are two different things.

How To Use An Impact Wrench

Loosening The Nut

Using your hand, grip the wrench. Start pulling the rocker switch and you need to position the socket over the fastener. Let the torque to start building up while you retain the impact wrench over the nut. Gradually, the torque will start loosening the nut.

Tightening The Nut

Start installing the nut with your hand and start pressing firmly using the wrench square drive. Use the forward setting and gently pull the wrench’s trigger. The socket should be placed over the head of the nut and start regulating the speed using your finger by modulating the trigger gently. Just make sure that you’re not tightening the nut too much to avoid damaging it.

Dislodging The Nut

When dislodging the nut, you need to adjust the impact wrench’s switch into the reverse setting. Using your both hands, grip the impact wrench and pull the trigger while placing the socket into the nut. Maintain one finger on the trigger while you are training the socket. The torque will be the one to loosen the nut. Once the nut is dislodged, immediately discontinue the action.

Tips On Maintaining An Impact Wrench

Your cordless impact wrench will be able to last for an extended period of time when you are properly maintaining it. One of the first things that you need to do is to make sure that everything, including the accessories is protected for any excessive sun, heat, and wet conditions. It is also essential to remove the dirt and debris on it before actually storing it. A dirt can cause jamming and misalignment of the impact wrench’s parts and can damage the power tool.

When it comes to the moving parts, lubricating them regularly would be best. But, always make sure to lubricate it using the lubricant that the manufactured advised. You can find the instructions on how you can lubricate each needed part in the manual included in the impact wrench. If you are using an oil-filled motor, changing the oil based on the instruction is ideal.

Conclusion

With all that being said, the two impact wrench from both Milwaukee and DeWalt can help you make the job done. All you have to do is to choose the one that has the features that you need the most. Both brands are great when it comes to their cordless impact wrench, but with the reviews above, this article undoubtedly helped you choose one that you need and want the most. Also, make sure only to use it on the right application and maintain it regularly. In this way, it will last for a long period of time, saving you ample of money for a replacement.

Continue Reading

Tools

Ryobi Vs Ridgid Vs Dewalt Vs Makita Vs Milwaukee Drill Driver

Published

on

By

For the most part, in today’s modern technologies and innovation, various gigantic power tool companies were established. Each one of them competes with each other by showing off what their power tool representative can do on a specified category.

One excels over the other, some offer impressive feature that the other can’t give. There are a whole ton of advantages and disadvantages between these prominent brands of power tools.

And that’s why we want to share you this review article about Ryobi vs. Ridgid vs. DEWALT vs. Makita, and vs. Milwaukee.  With this very article, we’ll show you why it’s important to consider your needs before choosing a particular brand and power tools.

If you’re ready to learn, read on!

Ryobi vs. Ridgid vs. Dewalt vs. Makita vs. Milwaukee Review

1. Ryobi P1832 18V One+ Handheld Drill/Driver and Impact Driver Kit (6 Piece Bundle, 1x P277 Drill / Driver, 1x P235 Impact Driver, 1x P118 Dual Chemistry Charger, 2x P102 18V Batteries, 1x Tool Bag)

 

The P1832 18V from Ryobi is ideal for contractors, homeowners, and do-it-yourself enthusiasts seeking to add to their arsenal.

This power tool kit is a six in one bundle that comes with a drill-driver, a lime green Ryobi tool bag, a charger, 2 li-ion batteries, and an impact driver. With all these accessories and tools, users can perform a number of projects around the household from boring holes to driving fasteners.

Users must keep their batteries in tip top shape with its li-ion battery charger that works well all Ryobi batteries, either One+ li-ions or those from the older blue series. Its charger’s online fuel gauge allows users to know how much their batteries have charged. In fact, the batteries themselves are compatible with almost anything from the Ryobi One+ system, aside from being backwards compatible with the earlier version blue series of Ryobi power tools.

All of these particular power tools can be conveniently stored together in the Ryobi lime green tote bag, which can double as a lunch pail in a pinch giving users optimal versatility on their workplace. Consumers can now reach their do-it-yourself potential because of this brand.

Pros:

  • Comes with bit storage and magnetic bit holders at the base
  • Features notched rubber molding on their pistol grips for extra stability
  • Long-lasting batteries
  • Has 1600 inch per pounds of torque coupled with a belt clip for convenient access
  • Comes with 24 setting clutch and dual speed gearbox for extra control over drilling

Cons:

  • Replacement batteries are a little bit expensive

2. Ridgid R9600 X4 Hyper 18V Cordless Lithium-Ion 1/2 in. Drill Driver and Impact Driver Combo Kit

 

This product from Ridgid is a must have combo kit especially that it comes with a very reasonable price.

Its 18-volt compact drill as well as its impact driver comes with the best-in-class torque for most demanding applications out there. Both power tools come with exclusive Grip Light Technology which engages LED light by simply holding the power tool and developed Hex Grip for optimal comfort to make every task and project much easier. In addition, it is powered by Hyper Lithium Technology which is an innovative battery technology built for high performance.

Furthermore they just work so much better compared to prominent brands out there that comes with a little bit higher price range. Some consumers will also like them since they are not that short and not too long at its end.

All in all, it’s a great deal and product. Rigid products are one of the favorites in the power tool industry.

Pros:

  • Comes with carrying bag, li-ion batteries, charger, impact driver, and a drill
  • Powered by HyperTM Lithium built for high battery performance
  • Removable Belt hook in order to keep the power tool in quick reach
  • Comes with Hex GripTM innovative micro texture for optimum user comfort and secure grip
  • Grip light engages light independently of trigger in order to illuminate work space
  • Comes with a very reasonable price

Cons:

  • Excellent drills but batteries tend to die fast
  • The removable handle only fits the drill

 

3. Makita CX200RB 18V LXT Lithium-Ion Sub-Compact Brushless Cordless 2-Pc. Combo Kit (2.0Ah)

 

This product from Makita allows consumers to do more with less, with its 2 ultra-compact cordless solutions for fastening, driving, and drilling in a more compact size with significantly less weight.

The 18 volt sub-compact driver-drill as well as the impact driver is new class of compact, with its size and weight of lower voltage power tools but with the compatibility, power, and performance of 18 volts. The pricey breadth-of-line of the Makita 18 volts LXT series implies an 18 volt battery from any LXT power tool will power the 18 volt sub-compact impact driver and drill-driver included in this power tool kit.

Furthermore, the kit comes with an ultra-compact two-speed brushless drill-driver with 2-speed settings that weighs only 2.8 pounds and a variable speed brushless impact driver that also has 2-speed settings that only weighs 2.6 pounds.

Moreover, for more efficient fastening, its impact driver offers assist mode that can get rid of cross threading and screw cam-out by driving at low speed until tightening starts. It is part of Makita’s ever expanding 18 volt li-ion series, which is the world’s largest cordless tool line-up powered by 18 volt li-ion slide style batteries.

Makita 18 volts li-ion batteries come with the fastest charge times in their class, so they tend to spend more time working and less time sitting on its charger. In addition, it is incorporated with Star Protection Computer Controls to prevent over-heating, over-discharging, and overloading.

Pros:

  • Impact driver only weighs 2.6 pounds
  • BL brushless motor can deliver 350 inch per pounds of max torque
  • Incorporated with mechanical variable two-speed transmission for a vast range of driving and drilling applications
  • Ergonomic and compact design at only 6-3/8 inch long
  • Comes with assist mode feature that get rids of cross-threading and screw cam-out by driving at low speed until impact starts
  • Ergonomics and compact design at only 5-5/16 inch long

Cons:

  • Quite lacking in power
  • Its speed control might tend to become a little bit of erratic

4. DEWALT DCK277C2 20V MAX Compact Brushless Drill and Impact Combo Kit

 

This product from DEWALT features a DEWALT brushless motor that can deliver up to 57% more operation time over brushed. It is lightweight and compact, engineered to fit into tight spots.

Impact driver is 5.4 inch back to front, and the drill-driver is only 7.52 inch back to front. Its ergonomic comfort grip handles can give perfect balance and power tool control for the consumer. It is also incorporated with LED lighting system with twenty-second trigger release delay that can give improved visibility in confined and dark spaces.

Its impact driver’s one-handed loading ¼ inch hex chuck will accept 1 inch bit tips. This product is simply incredible of a deal. In fact, it’s an impressive entry-level combo kit with a very competitive price range that offers many advantages for its users.

This combo kit’s specs are pretty standard. Both impact driver and cordless drill boasts a lightweight design and are a lot tinier compared to other units. With its combined weight of only 5.3 lbs. they cause very little strain to the users’ arms. Its handles are also coated with an ergonomic comfort grip that aids users control the tools more efficiently.

All in all, similar to its price, both its grip technology and weight make this product ideal for newbies. They are very easy to control, which makes home projects and repairs a less strenuous and enjoyable task. Thanks to Makita’s revolutionary design, users can use these power tools anywhere and anytime.

Pros:

  • Comes with a very reasonable price
  • Impact driver comes with a ¼ inch hex for oe-handed loading when changing the bits
  • Drill lets up to 1,750 revolutions per minute
  • Comfortable and strong grip that aids you work faster and much more efficiently
  • Incorporated with LED lights which let you work on poorly-lit places
  • Easy to store and move
  • Its lightweight design makes it easier to do repairs

Cons:

  • Not really ideal for heavy-duty and high intensity projects
  • Chuck is made out of plastic

5. Milwaukee 2691-22 18-Volt Compact Drill and Impact Driver Combo Kit

 

This drill and impact driver combo kit from Milwaukee is certainly a great deal.

It comes with convenient contractor bag, M18 li-ion ¼ inch hex compact impact, and the Milwaukee M18 li-ion ½ inch compact drill-driver. Examples of its innovations are its variable speed triggers, battery fuel gauges, integrated LED lighting system, durability, lightweight, and its 4-pole frameless motor.

If you need superior performance, accuracy, and power in an ultra-efficient combo kit, you can’t really afford to purchase anything but heavy duty. Covered by the confidence, this combo kit is the crucial tool collection for enduring professionals and do-it-yourself enthusiasts.

Furthermore, this combo kit is an excellent blend of performance, weight, and power. Aside from that, it is made up of two excellent power tools. Its drill-driver weighs only 5.3 lbs. and its impact driver only weighs 3.5 lbs. Both power tools come with LED lighting system, making it very convenient to work in poor-lit settings. In addition to that, the impact driver comes with a convenient belt clip.

This combo kit from Milwaukee has been in fact a bestseller for very long time. The reason for its success is easy to explain; you’ll get a good impact driver and drill at just a very reasonable price.

Pros:

  • Comes with soft-carrying case, one belt clip, charger, 2 compact batteries, ¼ inch hex impact driver, and 18 volt compact drill-driver
  • Comes with excellent warranty offer
  • Incorporated with variable-speed triggers, battery fuel gauges, LED lighting system, and lightweight durability
  • Equipped with ¼ inch hex compact impact with 4-pole frameless motor that can give 1400 inch per pounds of torque
  • Uses Milwaukee’s long-lasting M18 li-ion batteries
  • Features REDLINK intelligence
  • Made in USA

Cons:

  • Heavy build
  • Quite pricey

Recommendation

For the most part, since we’re talking about five prominent brands here, it’s a little bit hard to suggest and make a winner on this review.

However, what we can say is that your decision should absolutely be based on your needs. If you’re looking for a reliable and prominent brand of power tools, then the Ryobi as well as the Ridgid brand are your top two choices among the selection here.

On the other hand, if you want to make a valuable, long-term investment, then your choices must be between the DEWALT, Makita, or the Milwaukee. Again, no brand here will make your hard-earned money go to waste.

All of them come with their respective pros and cons. Make sure to assess all of your needs for your projects or tasks in order to make the right decision.

Continue Reading

Trending