Connect with us

Tools

BLACK+DECKER Li2000 Vs. LI4000 Cordless Screwdriver

Published

on

Both professionals and DIY people can use cordless screwdrivers to make their tasks easier. Just like a traditional screwdriver, the cordless screwdriver is a power tool, which will help you remove and insert screw from and to a certain material.

There are also screwdrivers that can help you drill holes in different materials, including wood, metal, and steel. What’s good about cordless screwdrivers is that they don’t need any power cable, since they work via a rechargeable battery.

Black+Decker is just one of the many companies who carry cordless screwdrivers. They are a reputable company because of how many professionals and DIY workers trust them when it comes to their power tools.

Two of the most popular cordless screwdrivers from Black+Decker are the Li2000 VS. LI4000. To ensure that we will give you accurate and detailed reviews about these two, we let our editors try these screwdrivers out and see for themselves. Continue reading the reviews below so you can get to know how these two cordless screwdrivers worked.

Comparing BLACK+DECKER Li2000 VS. LI4000 Cordless Screwdriver 

1. Black+Decker LI2000 Cordless Screwdriver With Pivoting Handle

Black+Decker LI2000 is powered by 3.6 volt lithium-ion battery that has the power to hold a charge for a maximum of eighteen months. The package comes with a charger so you don’t have to worry about that. This cordless screwdriver also has a speed of 180 RPM, which is perfect enough for small tasks.

The Black+Decker LI2000 also has a handle that can be positioned in three different ways. You can position the handle as an in-line, pistol grip, and the pivots. One of the best things about Black+Decker LI2000 is that you can switch it to the manual mode if needed.

The spindle lock, on the other hand, will help you give more control on the tool. Also, this cordless screwdriver is that it can easily be reversed and forward so you can remove or drive the screw when needed. The Black+Decker LI2000 comes with a Philips bit and a flat head. This power tool comes with a two-year warranty.

Pros:

  • Run-time is long
  • High quality
  • Uses lithium-ion batter
  • Spindle Lock
  • Two year warranty

Cons:

  • Only ideal for small tasks

2. Black+Decker LI4000 3.6 Volt Lithium-Ion Smart Select Screwdriver With Mag

 

The Black+Decker LI4000 is consists of two features, which will help the power tool to avoid stripping. It has a SmartSelect technology so you can easily select the needed torque for your task. The second one is the  six position clutch and the visual indicators. This power tool has a maximum torque of 70 inches/pounds, and a speed of up to 180RPM.

One of the good things about Black+Decker LI4000 is that it has a reverse and forward switch, which you can also read easily on the screen. Another good thing about this power tool is that the charger is mountable, which also comes with a storage for your bits. It also has a L.E.D which will let you know if the battery needs to be recharged.

Also, the charger that comes with the Black+Decker LI4000 is rated Energy-Star. With the strict guidelines that EPA and US Department of Energy, the charger of LI4000 meets all of them. This will not only be ideal for the environment, but as well as for your electricity bill. The reason behind this is that chargers with this rating can help save more than a billion of kilowatt hours every year. This also means that it will be as much as $100 million in cost. The charger needs a standard 110 Volts to effectively operate.

Pros:

  • Two-year warranty
  • Earth friendly charging unit
  • Cost effective
  • Uses lithium-ion battery
  • Has an L.E.D to help you check your battery

Cons:

  • Ideal for small tasks

Top FAQs

Q: Does this cordless screwdriver be use to reverse and unscrew something?

A: Yes, you can definitely reverse and forward the tool when needed.

Q: What are the type of bits that this cordless screwdriver uses?

A: The type of bits that this cordless screwdriver uses is standard hex bits.

What Is The Difference Between BLACK+DECKER LI2000 VS. LI4000 Cordless Screwdriver 

Performance

When it comes to the performance of BLACK+DECKER LI2000, you can definitely rely on it. It has a total speed of 180 RPM, which means that it can drive and remove the screws when needed. With this cordless screwdriver, you will be able to do small tasks. It also comes with slotted ad a basic Philips to help you get the job done easier and right.

For the Black+Decker LI4000 is packed with a speed of up to 180 RPM, and a maximum torque of 70 inches/pound. With its magnetic tip, you no longer have to worry about the screw falling off, because it will keep the screw in its place. It also comes with different bit sizes, which means that it can fit in any screw heads.

Design And Handling

The BLACK+DECKER LI2000 has a handle that can be adjusted in different positions, including in-line, pistol grip, and handle pivots. Another good thing about the handle is that It also has a simple lock, which you can use for manual operation. The handle will also help you work in tight spaces when needed. Also, for easier operation, you can use the forward and reverse operation easily. Lastly, it is very compact and portable since the LI2000 only weighs one pound.

When it comes to the Black+Decker LI4000 is consists of a reverse and forward switch. It also has an L.E.D where you can read some data on the screen. One of the best things about this cordless screwdriver is that it has a mountable charger where you can also store some accessory bits when needed. You no longer have to worry about cutters in your workplace. Lastly, the LI4000 is portable because it only weighs 1.98 pounds.

Battery

BLACK+DECKER LI2000 is powered by 3.6 Volts of lithium battery that’s rechargeable. One of the best things about this battery is that it has the power to hold a charge for one and a half year. With the powerful battery that this power tool has, you will surely be able to work for as long as you need without worrying about running out of battery.

The Black+Decker LI4000, on the other hand, is also built with a 3.6 volts lithium-ion battery. Just like the one above, it is also rechargeable and has enough power to get the job done. One of the best things about the charger that this battery has is that it follows the strict guidelines of the US Department of Energy and EPA. As mentioned above, it will not only save you on cost, but as well as with billions of kilowatt hours every year. Remember that chargers that are energy efficient can help avoid the greenhouse gases to be released in the environment.

What’s good about these batteries is that they can last long and can put around 100 screws in place before you need to recharge your batteries. This makes both tools very efficient when it comes to getting the job done right. Also, lithium batteries have a long life span, which means that it will take years before you have to replace them. If needed, you can also go to Black+Decker for the battery replacement.

Head To Head Comparison

When it comes to both BLACK+DECKER LI2000 VS. LI4000, both of them can do the jobs properly and accurately. There are similarities and differences with both these products. The difference may be is the L.E.D and the storage that the LI4000 has. Both of them can work on the job because of the speed and maximum torque that they have.

Also since both of them are using lithium-ion batteries, both will last for a long period without you worrying about running out of power when you need to work on something. The battery can also hold power for more than a year, so you can use it right away if needed.

Final Note

These are the reviews on BLACK+DECKER LI2000 VS. LI4000 cordless drills that out editors noticed and experienced when they used each of the power tools. We can confidently say that they are both great in what they do and can help you to accurate place screws or unscrew them when needed.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

four + 11 =

Tools

Benchtop Vs. Floor Drill Press

Published

on

By

Do you find it hard to choose the best tool to perform your drilling, sanding, and mortising projects? A floor drill press will do tougher jobs, but it comes at a higher cost, which may not be worth it for home-based workshops. You can buy a benchtop drill press if you concentrate on drilling standard Stock and light metal. Whichever workhorse you choose, ensure you get a solid cast iron construction and a powerful motor.

The benchtop drill press has a smaller motor usually 3-7 amps and a horsepower rating of 1/3 to 2/3, which is enough for woodwork. In this review, we chose WEN 4214, a top-rated 5-Amp drill press with a budget-friendly price that gives you value for the money. It has a 5/8-inch chuck, 3-1/8-Inch drill depth and 12-Inch swing capacity. It is suitable for both DIYers and commercial woodworkers with heavy-duty woodwork projects.

If you intend to drill large Stock, over 13-Inches, as well as heavier metallic applications, then you are better off with a great floor drill press. Shop Fox W1848 is a powerful 9-Amp drill press that you can also convert into a quick sander or a mortising tool depending on your needs. It is more expensive compared to the WEN 4214 but worth the investment considering its solid construction and broader application.

1. WEN 4214 12-Inch Variable speed drill pres

WEN bench tools are designed for professional woodwork, but they have a friendly design making them easy to operate. This drill press is specially designed to handle heavy-duty drilling, sanding, or mortising projects in a workshop. Most people go for it because of its friendly price, but we loved it for its solid cast-Iron construction and a powerful 5-Amp four-pole motor. It has five-speed modes ranging from 580RPM to 3200RPM, allowing you to customize the speed for different material densities.

It is operated using a rack and pinion system that is both durable and easy to operate. It has a 5/8-inch keyed chuck, which can be connected to a variety of bits and sanding drums up to a 1/64-inch diameter. The spindle travels 3-I/8 inches, which allows you to drill deeper than the 2.5 inches offered by most drill presses. You can also set accurate depths for each project with the depth adjustment stop for uniform depths.

It stands 37 inches top to bottom, which makes it easy to operate on a table or directly from the floor. It also weighs 85lbs, which makes it stable when running and easy to move around when necessary. This drill press is also easy to use thanks to an LED display that tells the exact speed of the motor. It also has a laser guide light, which increases accuracy. Moreover, it has a work light that brightens up your workspace.

The table is also suitable for loading large Stock measuring 9 inches on both sides, meaning it can carry a load over 20 inches wide. The table adjustable and removable for convenience. It also bevels 45 degrees to both sides, allowing you to drill curved pieces, joints, and angled holes. It also has a roller extension to carry bigger loads.

 

Key Features

  • Chuck: 5/8-Inches
  • Power: 5-Amps, 110V
  • horsepower: 2/3hp
  • Quill: 2- inches
  • Spindle: 3-1/8 inches
  • Speed: 580-3200RPM
  • Table: 9.5 inches

Pros

  • The table is large and has a roller extension
  • It has a laser guide light for accuracy
  • Five-speed modes for handling different densities
  • LED display for easy speed reading
  • A bright work light for dark spaces
  • The chuck has three jaws with a sturdy bit grip
  • Cool silent operation

Cons

  • It has many parts which make it hard to set up
  • It doesn`t have a reverse drill function

Top FAQs

Q: Can I use this to drill through 2-Inch steel?

A: Yes.

Q: Can the speed go lower than 580RPM?

A: Sure. It can go down to 500RPM.

Q: Can I sue this drill press for sanding?

A: Yes.

Q: Does it have an oscillating belt?

A: No

Q: Is this drill press suitable for drilling steel?

A: Yes and No. It can drill steel, but the finish is rather rugged due to its high speed

2. Shop Fox W1848 Oscillating Floor Drill Press 

 

 

If you need to handle many commercial projects with lots of sanding mortising and drilling both metal and wood on one tool, then you need Shop Fox W1848. It has a large swing capacity of 13-1/4 inches with a cast iron body weighing 122lbs. This drill press remains stable while running. Its most significant feature is the simple change over design that allows you to switch between drilling to sanding without tools. It also has a broad 24×15 inch base for more stability.

The motor on this floor drill is also suitable for demanding projects. It is a 9-amp induction motor with a horsepower rating of 3/4hp. It also has 12 speeds from 250RPM for steel to 3050RPM for softwood, cardboards, and plastic. It is operated by a rack and pinion system, which allows the spindle to move smoothly even at high speed. It is fitted with a durable replaceable oscillating belt for long-lasting service.

Its spindle travels 3-1/4 Inches so you can use it to drill thick material. The chuck is 5/8 inches and fitted with three jaws to clamp down on a wide range of bits and sanding drums. It also comes with three different sanding drums ranging from 2 inches to 1 inch for both small and large workpieces. The package also includes grit sanding papers for each sanding drum.

The table is 12-3/6 inches in diameter and can hold wide planks up to 24-Inches in width. It is also fitted with 2-Inch wide holes that allow the chaff to go through preventing clogging. It can also be tilted at 90 degrees on both sides, making it easy to work with joints, curved pieces, and angular drilling.

Key Features

  • Chuck: 5/8-Inches
  • Power: 9-Amps, 110V
  • horsepower: 3/4hp
  • Spindle depth: 3-1/8 inches
  • Speed: 250-3050RPM
  • Table: 13-1/4 inches

Pros

  • It is easy to switch from drilling to sanding
  • 12-speed settings allow you to adjust for different material
  • Large table (13 inches) which can tilt up to 90 degrees
  • Solid cast iron construction
  • Quick heat dispersion keeps it cool when working

Cons

  • It doesn’t have a laser pointing system
  • It is too heavy to carry around

Top FAQs

Can I remove the table?

A: Yes. The table is both adjustable and removable

Q: What is the warranty?

A: Two years

Q: Is this suitable for drilling through ceramic?

A: Yes

Q: What is the voltage?

A: 110V 

Direct Comparison

Power

The floor drill press has more power than a table drill press because it is built to work more regularly and on tougher material. Shop FoxW1848 has a 9-Amp motor with a 3/4hp, which delivers a higher torque in every stroke than WEN 4124`s 2/3HP. The floor drill press delivers the high torque needed for drilling smoothly through steel and tough fiber. The benchtop drill press motor is strained by thick steel and fiber leading to a rather rugged finish.

Speed

With drill presses, you need lower speed for higher torque, especially when dealing with metal and tough lumber. The floor drill press has a minimum speed of 250RPM, which cuts smoothly through steel better than the 580RPM of the WEN 4214 drill press. Shop Fox W1848 also has 12 distinct speed settings that make it easy to customize your drilling depending on the density of the material in question.

The floor drill press has a top speed of 3050RPM, which is suitable for woodwork and plastic, although it doesn`t cut as fast as the 3200RPM delivered by the benchtop drill. WEN 4214 has only five distinct speed settings suitable for light material, including steel less than 2-Inches thick.

Sanding

Shop Fox W1848 has an oscillating belt specifically meant to make contour sanding easy. It also includes sanding drums, which reduce the extra costs needed to convert a benchtop drill press to a sander. WEN 4214 can also be used for quick sanding thanks to its high speed, although you have to invest in sanding drums and paper. It can`t do it efficiently as you have to hold and direct the workpiece yourself.

Table

These drill presses have iron cast tables designed to last for a long time under frequent heavy-duty use. Shop Fox W1848 also comes in at the top because the table is 13-1/4-inch, which allows you to access extra-large Stock. The table also bevels at 90 degrees, which enables you to drill curved pieces and tight angles comfortably. WEN 4214 has a 9.5 Inch table and a beveling angle of 45 degrees, which limits you to smaller workpieces.

Spindle Depth 

These two have equal spindle travels of 3-1/8 inches. It allows them to handle similar thicknesses of Stock. Shop Fox, however, works better through the Stock compared to the WEN benchtop drill press.

Precision

WEN 4214 has a laser-guided X-rays that pinpoint the exact point of drilling, reducing the chances of error. Shop Fox W1848 does not have a laser guide system, which reduces its accuracy.

Final Note

Choosing between a floor drill press and a benchtop drill press is a decision that affects the type and quality of your woodwork for a long time. Tight budgets and limitations of space and experience force many people to go for low-quality benchtop drill presses. This review is a comparison of the best drill press and floor drill press you can get on a tight budget and get the value of any high-end drill press.

Continue Reading

Tools

Rotary Hammer VS Demolition Hammer

Published

on

By

Rotary hammers vs. demolition hammers debates are quite complicated. In some instances, you’ll be able to complete the same tasks with either one. However, the main takeaway here is that they do come with their respective benefits you will only find on each power tool.

You must know what those benefits are before deciding which one to purchase for your needs. Let us look at what you will get from either one before mentioning else. Stay tuned!

Rotary Hammer vs. Demolition Hammer

1. Makita HR2475 1-Inch D-Handle SDS-Plus Rotary Hammer

What You Will Get With This Product:

Makita HR2475 features a 19/16 drilling capacity with the capability to give 680 revolutions per minute. It is also very convenient since it has a lightweight feature of only 6 pounds which makes it easy to carry. In addition it accepts SDS Max bits.

Unlike any other products out there, rotary hammer can automatically disengage the gears in the second that the bit binds. With this unit, if your bit jams, the torque restricting clutch will guide your hands by taking control of the tool.

It is also designed with field core interlocking steel laminations, a dual ball bearing armature, and copper commutator bars. This function aids in improving the efficiency of the unit by enhancing the energy transfer efficiency to give extended tool life and more power.

All in all, you’ll get the Maktia motor advantage designed with field core interlocking steel laminations that makes the life of the tool longer and enhances the energy transfer efficiency of it for more power especially that the tool is integrated with dual ball bearing armature and more copper commutator bars. Additionally, its sequential impact timing that provides timed hammering while rotating minimizes overlapping bit impacts and thus resulting for up to 50% faster drilling.

To supplement all of those actions, its torque limiting clutch design prevents gear damage by automatically disengaging gears if ever the bit binds. And lastly, you’re rest assured that you’ll get the most out of this power tool as it comes with a powerful 7 amp motor that can deliver up to 0 to 1,100 RPM and 0 to 4,500 BPM for the most demanding applications out there.

Pros:

  • Incorporated with built-in torque limiter that guarantees stable torque control
  • One-touch sliding chuck lets for quick bit changes
  • Comes with ergonomic d-shaped handle with rubberized soft grip for improved control and comfort
  • Extended life brushes
  • Has 3 modes of operation for added versatility

Cons:

  • You should get bit grease for it
  • Doesn’t work on 220V 

Top FAQs on This Product:

1. Can one of the settings handle the slower revolution per minute required for larger diameter holes in heavy timber?

-Definitely! It have hammer w/ drilling, drill only, and hammer only.

2. Can I use a chisel type bit, to scrap?

-As long it is SDS plus, it should work fine.

3. Does it feature constant speed control?

-Remains constant unless you’re drilling with force, that is pushing hard on the bit.

4. Will this rotary drill met me to insert smaller than 1 inch SDS-plus drill bits into it or do they all need to be specifically 1-inch drill bits?

-The drill will accept any size bit manufactured with the SDS-plus shank.

What Take on This Product:

If you’re someone that want a power tool that is very powerful in a durable way, yet simple with its design, then this unit from Makita is not here to play because it is ergonomically designed, powerful, and sleek that offers the maximum output and comfort for everyone. It’s in fact a must-have tool for every carpenter out there.

If you’re looking for the quickest way to drill a hole, then the Makita HR2475 rotary hammer is your answer. It features a powerful 10 amp motor that aids to easily get the word done. With this power tool, you’ll get up to 50% fast drilling speed with 2,500 BPM combined with its sequential impact timing.

2. Bosch 1-1/8-Inch SDS Rotary Hammer RH328VC with Vibration Control

What You Will Get With This Product:

Similar to many other models of power tools produced by Bosch, this unit also gives optimal impact energy, drilling speed, comfort, and power to acquire the best efficiency and performance. Coupling it with the model’s vibration control feature and its high power to weight ratio, you’ll get a top-notch power tool that’s bound to become immensely prominent.

Operating in 3 integral modes namely: rotary hammer, hammer only, and rotation only, its motor can achieve the speed of 900 revolution per minute and 4,100 beat per minute. In addition, it comes with an auxiliary handle that permits a flexible and comfortable grip.

Its variable speed 3-finger trigger can offer better precise bit starting as well as better operator control. Also, its integral clutch helps minimize torque reaction while its 360-degree auxiliary handle gives the power tool better flexibility for any given task.

Now, as we’ve mentioned before, its multifunction selector offers 3 modes of operation. These modes are ideal for any tough drilling jobs out there, which is really worth the price. As for its vario-lock, this mechanism places the tool in neutral, permitting the user to select from 12 different positions.

And lastly, the Bosch 1-1/8-Inch SDS Rotary Hammer features an active vibration control in its grip area and hammer mechanism which ultimately provides maximal comfort for faster drilling during those extended time of duty. All of these features are supplemented with its unrivaled power to weight ratio of 8 amps to 2.6 feet per pounds of impact and energy, as well as 7.7 pounds of compact power.

Pros:

  • Very suitable even for the most demanding DIY projects ou there
  • Comes with a carrying case
  • Backed by an excellent warranty offer
  • Offers better operator control and precise bit starting
  • Very versatile due to its 3 mode of operations

Cons:

  • Its depth guide is sometimes inconsistent
  • Can’t work with certain large bits

Top FAQs on This Product:

1. Can you use it as a regular drill?

-Unfortunately, it’s not engineered for drilling into wood because it’s a little bit powerful. It is specifically made for stone or concrete chipping/drilling.

2. Can a spade be fitted to use on this unit?

-Yes, one can fit for this model. In addition, you can remove tile with the spade bit.

3. Is this keyless?

-Yes, it utilizes SDS bits. There may be a key chuck available so you can use standard bits.

What Take on This Product:

Just like any other power tools produced by Bosch, this unit certainly outstands in almost all fields. It is well-designed and very powerful rotary hammer. In terms of overall ease of use, it’s very good as it comes with an auxiliary handle and therefore provides one better control over the device and makes the whole process of drilling a lot easier to manage.

Its 2-step vibration control minimizes the vibrations and lets you to be much more accurate when using the device. Its three different operations modes will allow you to use it for a number of various DIY projects, making it one of the most versatile models of its class today.

3. DEWALT D25263K D-Handle SDS Rotary Hammer with Shocks, 1-1/8″

What You Will Get With This Product:

This SDS rotary hammer from DEWALT comes with a drilling capacity of 1 1/8 inches and it will also deliver 3 joules of impact energy. In addition, it utilizes SHOCKS technology for its vibration control to minimize user strain.

Most high torque reactions are minimized because of its integral clutch. One thing you must know about this model is the fact that it comes with a rotating brush ring so you’ll be able to get the optimum speed and torque in forward motions and in reverse.

Its motor operates at 8.5 amps which is significantly high for a this kind of power tool. In addition to that, it accepts SDS plus bits and it also comes with a D-handle design for an ergonomic grip.

To sum it up, upon acquiring this unit, you’ll get a kit box and a depth rod that weighs 12 pounds. Not to mention that it will surely provide an incredible power that can effortlessly go through tough concrete materials. In addition, its side handle can be adjusted for up to 360 degrees for outstanding flexibility.

But what’s really amazing about this power tool is that it will accept SDS+ bits along with a D-handle design for extra user’s comfort. To supplement these crucial features, the tool was incorporated with a rotating brush ring for achieving max speed and max torque for reverse and forward motions.

As for the user’s comfort, DEWALT D25263K utilizes shock technology of vibration control to significantly reduce the strain from using it.

Pros:

  • Rotating brush ring that can deliver max torque and speed in forward and reverse
  • Integral clutch minimizes sudden, high torque reactions
  • Incorporated with active vibration control
  • 5 amp high performance motor
  • 3 Joules of impact energy

Cons:

  • A little bit noisy
  • Tends to slip on the next mode

Top FAQs on This Product:

1. Does this unit have the option of variable positions for chisel bit?

-Yes, and it can lock in position in either vertical or horizontal positions.

2. Is grease for the bits needed?

-Yes. Elbow grease would suffice.

3. What’s the difference between the 1inch and 1 1/8 inch SDS hammer?

-It’s the size of hammer and electric motor inside the unit. 

What Take on This Product:

If you’re seeking for an efficient rotary hammer drill that can aid you drill through touch concrete and other tough materials out there, then you should definitely consider this model.

The DEWALT D25263K D-Handle SDS Rotary Hammer is highly considered by many handymen around the world, who’re saying that this model is one of the finest rotary hammer drills that your hard-earned money can purchase.

What is the Difference between Makita HR2475 vs. Bosch 1-1/8-Inch SDS Rotary Hammer RH328VC vs. DEWALT D25263K?

In terms of demolishing or drilling concrete, there seems to be a countless lineup of specialized power tools claiming to be up for the task. But the sheer number of power tools engineered to power through concrete can often feel overwhelming.

And this is the reason why we’ve presented you two kinds of power tools namely: Rotary hammers and demolition hammers. To find out why the other is better over the other, and vice versa, let’s check out their respective models:

First is the Makita HR2475 that features a 19/16 drilling capacity with the capability to deliver 680 RPM. This unit is also very convenient because it comes with a lightweight feature of only 6 lbs. that makes it quite portable. Also, it accepts SDS Max bits.

On the other hand, Bosch 1-1/8-Inch SDS Rotary Hammer RH328VC provides maximum impact energy, comfort, drilling speed, and of course power to achieve the best efficiency possible and performance as well.

And lastly, the DEWALT D25263K comes with a terrific drilling capacity of 1 1/8 inches and it can also give 3 joules of impact energy. Also, it uses shocks technology for its vibration control to significantly reduce the user’s strain.

Final Thoughts

Rotary hammers are much more suitable for professional use especially that these tools are multifunction hammer. They can adjust to the right location coupled with the right drill bit that can replace ordinary electric drill and demolition hammers.

On the other hand, demolition hammers are great impact on function objects directly impact damage like you’re using a chisel and a hammer to work. All in all, demolition hammers have much higher efficiency and power compared to rotary hammers.

How about you? Have you tried both of these awesome power tools? If so, please comment down below and we’ll get back to you a.s.a.p.!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Continue Reading

Tools

Hitachi C12fdh VS Dewalt Dw715 Miter Saw

Published

on

By

A compound miter saw is a life saver for any DIYer or finishes carpenter for quick and efficient woodwork. It is not necessarily easy to land a great saw in the market today but if you have narrowed down to Hitachi and DeWalt, you are almost there. These two are the manufacturers of the most durable and reliable 12-inch miter saws in the market. Hitachi C12FDH and DeWalt DW715 are both 15amp motor saws with a 12-inch blade designed for use by both professionals and amateurs. They both have silent operation, well-marked detents at major angles on the miter and very silent operation that allows you to set up indoors. They are seemingly similar which is why a professional opinion is the best way to match one to your needs.

Both new buyers and experienced woodworkers find it hard to choose a favorite between the two because of the matching blade speed at 4000RPM and the similar price range. There are many confusing reviews online regarding these two tools which is why we conducted our own research testing both products and asking experienced users about their experience. We have created reviews below for both tools to let you choose your favorite. You can continue reading below to see our opinion and the results of the research.

Hitachi C12fdh VS Dewalt Dw715

1. Hitachi C12FDH 12 Inch Dual Bevel Miter Saw

 

 

This is a dual bevel miter saw which allows you to perform crown molding and regular lumbar cuts on both sides of your workpiece without having to flip the piece. This makes your crown cuts accurate and quick. It also has a laser pointer that can be moved to the right or left allowing you to cut accurately on both sides of the workpiece.

Like all Hitachi tools, This Miter is designed for professional use but its simple design still makes it a great saw for general home use as well as long as you can handle the specs. It is a rapid cutter featuring a 12-inch 32 teeth carbide blade with a high speed of 4000RPM. This is fast enough to cut through hardwood quickly. Its dual bevel which slides on both sides also allows you to retain your settings by just flipping the bevel at your required angle to resume the same cuts next time.

Its high steel fence allows you to clamp 6 by 4 planks comfortably which improves the precision of your cuts. It has a 15-amp belt driven motor, the most powerful motor of any DIY miter Saw delivering 1900 watts which can do cross cuts into any dense wood without leaving chipped ends. It is also very silent with little vibration at the handle.

It comes fitted with onboard clamps that helps you hold your pieces in place on every project. Its dust bag is also able to collect more of the chaff than most models. The main concern in our reviews was the lack of a safety button on the handle and their failure to include bevel detents. You also have to reach far to the back of the saw to make laser adjustments and lock the bevel.

Pros:

  • Dual Bevel moves on either side up to 52 degrees
  • A durable heavy-duty carbide blade
  • Belt driven 15-amp motor for a silent operation
  • Laser guiding technology for high precision cutting
  • Easy access brushes

Cons:

  • It lacks bevel detents
  • The plastic miter lock gets loose with time

 

2. DeWalt DW715 12 Inch single bevel Miter Saw

 

This is DeWalt’s bestseller Miter saw famous for its premium parts and easy controls. It also has a 15-amp motor with a speed of 4000RPM like Hitachi although this is a single bevel saw which means you have to flip your workpiece for double cuts. This is also a powerful miter saw able to handle any lumber needs you may have in a workshop or at home. Its constant cutting speed means it doesn`t leave splinters on the wood or chip it which makes it a great tool for finish and joint cutting.

Unlike Hitachi, this saw has bevel dents at 0°, 33.9°, 45° and 48° which increases your precision when cutting any angle on your workpiece. Its miter also has 11 detents at all major angles and even better, a miter dent override that allows you to set your own cut angle. Its miter lock is all steel making stable stops that increase the accuracy of each cut.

Dewalt also has a greater safety degree featuring a safety button on the handle which keeps you safe if you release the blade while still running at top speed. It also features a high fence with a sliding left fence that can be fully removed for accurate bevel cuts on the workpiece. This saw is also one of the lightest in the market weighing just 42lbs which makes it easy to move from one place to another.

Pros:

  • It has a safety button
  • The miter override allows setting accurate cut angles
  • Premium parts plus durable carbide blade
  • High sliding fences allows accurate bevel cutting
  • It has bevel detents at major angles
  • It has extended handles on the sides

Cons:

  • It is a single bevel saw making double cuts a tough job
  • The dust bag doesn’t catch much of the chaff

Head to head comparison of DeWalt and Hitachi Miter Saws

Performance

This is a major subject because these two tools have matched speeds at 4000RPM speeds because of similar motors. A close view at finished cuts, however, gives Dewalt an upper hand in terms of smooth finishes on dense wood. The Dewalt Miter lock is very sturdy giving it the higher precision cut. The main Hitachi fault is the non-detented bevel with a weak miter lock that may swing slightly if you are not an experienced user. Professional users able to follow the laser marker keenly, however, have no problem with Hitachi.

Durability

Both tools are made of ABS plastic and steel, the basic standard for this class of tools. The Hitachi build, however, features many plastics at the controls and miter lock which wears quickly reducing the durable service of the saw. This gives Dewalt a slightly upper hand. Major parts, however, have a matching life potential. Hitachi has easy access brushes that allow you to replace easily whenever you need to, a slight flaw there on Dewalt.

Control

Accurate angle setting is very easy on Dewalt because of the detents on both the miter and the bevel although Hitachi overrides this through the laser guide that highly increases your precision. Both tools are generally easy to operate because of the low lift angle for comfortable lowering, forward and backward blade movement. Controls for the bevel lock setting as well as miter adjustments are easy to access.

Accuracy

The primary reason for using a miter saw instead of a table saw is accuracy and these two are both high precision cutters. The Hitachi has the greatest advantage in this regard because it is a dual bevel able to cut accurate crowns on any side without the need for flipping and resetting. If you follow the laser mark accurately, its bevel cuts will also come out accurate. It is able to make the most complicated cuts which make it a great choice for a workshop

Dewalt`s major angle detents and detent overrides allow you to set accurate cut angles as well. Having to flip your workpiece for dual cuts may need a reset although it is not a reason to give up on its high-quality parts and top-notch operation. In a DIY setting, Dewalt will come in handy for a wide range of cuts although you may encounter trouble making accurate complicated cuts, especially on commercial projects.

Safety

Both saws have a strong blade guard and clamp keeping you safe from flying wood splinters and chaff. Dewalt has a safety button on the handle that extends this advantage especially for DIYers and homeowners with little experience with the saw.

Our opinion

We followed each user complain and praise carefully testing the tools to make sure it reflected on the tool and to see if it affected performance. A good saw can only be validated by great performance and in this case, both saws have a top-notch performance which means whatever choice you make, it will not be a mistake. If you follow the guide keenly, you will realize that Hitachi`s high specs need a keen eye to achieve its full advantage because Hitachi manufactures with a professional in focus. This makes it a great tool for a workshop because it can make high precision cutting even for complicated woodwork. It is still easy to use which is why even a homeowner can use it if you want to exploit the great benefits of a dual bevel miter saw worth the money.

Dewalt is a great recommendation for any setting that requires a miter saw. It is very durable and easy to operate which is why many people praise it over other tools. It is true it has premium features, reliable and durable but not without the limits of a single bevel miter saw. It is a great tool for both professionals and amateurs because of the friendly design and sturdy detents on the miter and bevel.

Conclusion

A Miter saw worth the money has to offer reliable long-term service which is why you need to choose the one saw that will prove to be a one-time purchase. This Hitachi C12FDH and Dewalt DW715 comparison has clear details of what the market has to say regarding these two tools. We have no favorite between the two but we have gone through how they both perform on site allowing you to match the right saw to your project whether you need a saw for your projects at home or for commercial grade projects.

Continue Reading

Trending